d31b6f545fb584ffc1d72c8ba7a17cc9d6882b27
159
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 sjg
|
d31b6f545f |
[test](trx-frontend-http): watch the history progress from inside the page
The replay-progress check polled the overlay from the test every 100ms. A replay that starts and finishes between two polls is never sampled, and the test then reports that no progress was shown at all -- the source of the intermittent "no progress was shown while the history loaded" failure. Record the samples from a MutationObserver installed before the page's own scripts run, so a fast replay is observed rather than missed. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
39f551c914 |
[fix](trx-frontend-http): hold the APRS symbol column open for frames without one
renderLocalAprsSymbol() returns nothing when a packet carries no symbol table or code, so those rows lost the icon's 24px slot and every column after it -- callsign, type badge, summary -- slid left against the rows around them. Frames that do carry a symbol then read as indented. Render an empty slot of the same size instead, so a list mixing position reports with messages and telemetry still lines up. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
6d25ecdc11 |
[feat](trx-frontend-http): give the AIS list the same log shape
A message was three stacked lines — time and name, then MMSI and route, then motion, distance, position and age — so a screen held eight of them. It is one line now: time, vessel, message type, and what the message says, opening in place for the MMSI, the channel frequency, the route, the age, the fix and a jump to the map. Twenty-two fit where eight did. What a message says depends on what it is. Position reports give the fix and the motion; the static and voyage reports that carry no fix give the callsign and where the vessel is bound. Both fall back to whatever fields are present rather than showing nothing. The row vocabulary the APRS list introduced is no longer APRS-specific — the classes are decode-line and decode-expanded now, shared by both, and identity sits in fixed columns so the summaries line up down the list instead of starting wherever the callsign happens to end. The three summary cards above the list go the way of the APRS ones. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
37987b2779 |
[feat](trx-frontend-http): make the APRS list a log, and read the payloads
A frame was a card five lines tall — timestamp, a meta line, the information field as it arrived on the air, three buttons, and a Details panel repeating the four things already on the row — so five frames filled the panel and the payload was left to be decoded by eye. A frame is one line now: time, station, type, and what the frame says. It opens in place for the path, the CRC, the raw field, its bytes and the actions. Twenty-one frames fit where five did. And the information field is read rather than echoed. Weather reports give temperature, wind, humidity and pressure; telemetry gives its sequence and channels; a message gives its addressee and text; a position gives the fix, course and speed, and the comment the station wrote. Anything that cannot be summarised falls back to the raw field, which is in the expanded view either way. HF APRS had a copy of the same forty lines of markup, differing by one badge, so both now build their rows from one function in the shared module — the CSS is shared between them and this would have broken it otherwise. Both headers lose their three summary cards for a line of counts beside the filters, which frees another fifth of the panel. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
67a7bace4e |
[fix](trx-frontend-http): let the decode lists fill their panel
FT8, FT4, FT2 and WSPR size their list against the panel with flex, and the sidebar layout made the panel a grid item aligned to the start of its row — sized to its own content. The lists collapsed to their 120px minimum with several hundred pixels of the page empty underneath. The panel stretches to the row now and the sidebar keeps its own height. The marine lists were sized a different way, by formula: 100vh minus a guess at everything above them. That guess stopped matching the moment the panel changed shape, so they left a few hundred pixels unused as well. They fill the panel like the rest now, and so does CW, which had a 360px ceiling. HF APRS had no container styling at all — no scroller, no frame, no height — so its packets ran down the page. It gets what the other packet lists have. The smoke test measures each list against its panel and requires it to scroll on its own. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
b48cc23d6e |
[fix](trx-frontend-http): keep the rig names through the state stream
The picker and the header showed each rig's lowercase id instead of its configured name. applyRigList takes the names as a parameter defaulted to an empty map, and the state-update path passes only the rig ids — names come from /rigs, not from a state frame — so that call landed on the default and the body, which treats "an object" as "here are the names", cleared them. One frame after load the names were gone for the rest of the session. Omitted now means no news rather than no names. The fixture is why this was invisible: it pushed an identical status payload every tick and the client skips a frame equal to the last, so render never ran and neither did the call that did the damage. Its event stream varies between frames now, as a real one does. Which immediately caught a second fault: state frames arrive continuously, and one sent before the server applied a new squelch threshold snapped the line back to where it had just been dragged from. A local change outranks the echo for two seconds, the same idea as the optimistic frequency guard beside it. The fixture also records what /set_sdr_squelch sets and reports it back afterwards — the drag test had been passing against a server that ignored the write. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
c1899229a0 |
[fix](trx-frontend-http): stop the decode history replay giving up at 20s
Reloading a second time sometimes showed history the first load did not, and the safety valve is why: it called one function that both released the buffered live decodes and tore the history worker down, so any load where the replay had not finished inside twenty seconds — a large backlog, a cold cache, a slow link — dropped whatever had not arrived, without a word. A reload got another go at it, and the second one is faster because everything is cached by then. Those are two separate things now. At the timeout the live decodes are released so the panels are not held back, the replay carries on, and the progress says so. The fallback's error path retries once and then says "Decode history unavailable" rather than leaving the operator to guess whether there was anything to see. The progress is no longer a scrim. It was fixed to the whole viewport with a wash over the page — the waterfall, the decode panels, all of it — for the length of the replay, which is exactly when there is something worth watching. It is a corner card with a bar: indeterminate while the payload is on the wire, then filling as N of M messages replay. None of this was reachable from a test. /decode/history answers in CBOR and the worker reads the body as CBOR unconditionally, but the fixture served JSON, so every browser run had been exercising the client's retry path and never its history path. It encodes CBOR now, including the 64-bit form the millisecond timestamps need, and decode-flow serves 1200 records and holds the client to restoring all of them on the first load, showing progress while it does, and never covering the page with it. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
84a99a3636 |
[fix](trx-frontend-http): load the decoders that own the digital modes panels
AIS, VDES and both APRS decoders were listed under the map plugin group alone, so opening Digital modes and clicking AIS or APRS gave an empty panel reading "Connected, listening for packets" while the decodes piled up unprocessed in the plugin runtime. They appeared only if something had opened the Map tab first, which flushed the queue. There is also a map-data group naming exactly those four that nothing loads: the loader is called with tab names and no tab is called map-data. They load with the tab whose panels they fill now. map-core stays lazy, since their calls into it are optional and the Map tab can go on paying for Leaflet by itself. tests/decode-flow.mjs follows a decode from the wire to the map: an AIS vessel and an APRS beacon arrive on /decode, and it asserts both panels fill with the map module confirmed absent, the mini view names the vessel and offers a pin, following that pin lands on /map centred on the vessel, and both decoders leave a marker. Nothing exercised any of this before — the fixture served an empty decode stream, which is how the map links came to be broken for every decoder at once. The fixture stamps decodes as it sends them, since the client prunes anything outside the retention window, and repeats them, since the views collapse by vessel and need more than one frame to behave. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
84bdf2593c |
[fix](trx-frontend-http): measure whether the tab bar fits, and watch for it
CI put the tab strip 9px into the controls at 1440px with no scaling at all, on a bar that had every degradation step available to it and used none of them. It used none because nothing thought anything was wrong: the fit test was an arithmetic estimate — identity + nav.scrollWidth + actions.scrollWidth + a 48px allowance for the gaps — and on a platform whose fonts run wider than the one it was written on, that allowance no longer covered what it stands for. An estimate that says "fits" stops the ladder before its first rung. It reads the geometry now: the controls have to stay inside the bar, and no tab may reach them. That is the same measurement the test makes, so the two cannot disagree about any platform's metrics. The tabs are the subject rather than the nav's box because the nav shrinks below its content — the box gets smaller while the tabs keep their width and slide underneath the controls. A second fault turned up while probing this: the strip only reflowed on window resize. The rig name arriving from the server, the style picker filling in, a font swapping in wider metrics — each changes what fits without touching the window, and the bar sat there as it was through all of them. A ResizeObserver on the bar and the controls covers those, and document.fonts.ready covers the swap. The guard sweeps text scales and adds a station name too long for the bar, but it should be said plainly: it passes against the old code too. Nothing here reproduces on this machine — a 4px viewport sweep from 1080 to 1500, three wide font stacks and scales from 1.0 to 3.0 all failed to make the old estimate lie. What is fixed is the mechanism that could. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
c527f20a88 |
[feat](trx-frontend-http): give digital modes a decoder sidebar
Thirteen decoders in a horizontal strip needed a scroller on anything but a wide window, and the open one was marked by a single underline among thirteen. They are a list down the left now, all visible at once, each keeping the state dot it already carried, with the panel for the selected one filling the rest of the width. No script changed: the sub-tab wiring, the aria roles, the decoder picker and the state-dot observers all work on the same markup, so this is layout only. Below 760px the sidebar gives way to the picker that already existed there. That path needed align-content: the tab panel fills the page height and a grid stretches its rows to match, which handed the picker a 218px row and left a 189px gap under it. The tab icon was the signal-strength bars, which is what the S-meter shows two rows above it; a pulse train says digital modes instead. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
9f495021f0 |
[style](trx-frontend-http): name and fence the three audio groups
The row carries three unrelated things — how loud it is, whether there is any audio at all, and how much is arriving — and only the middle one was named. Each is a group now: VOLUME over the two sliders, SQL on its own switch, LEVEL over the meter, with a hairline between each. The rules are drawn only while the row is one line, measured against the row rather than the viewport: what fits depends on whether the rig transmits and whether it has a squelch at all. A rule divides what sits either side of it, so once a group wraps the wrap is the division and the rule would just be a mark at the start of a line — which is what it was at 900px before this. The labels carry the grouping on their own below that width, and the groups stack whole on a phone. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
33aa7b807c |
[style](trx-frontend-http): fence the squelch off from the volume controls
The squelch sat in the audio row on the same gap as everything else, so it read as a continuation of the volume sliders. It decides whether there is audio at all, which is not the same kind of control as how loud it is, and a hairline says so. The rule belongs to the squelch block, so it leaves with it on a rig that has none, and it stands down where the row stacks: there the line break separates them already and a leading rule would just start a line. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
2c56d82a81 |
[feat](trx-frontend-http): make the SQL label the squelch switch
Clicking SQL turns the squelch on and off. The label and the button beside it said the same thing twice — one naming the control, the other reading "On" or "Off" — where the name itself is the obvious target, and the dot already carries the state: grey when off, green while the gate passes, amber while it holds. The pressed state is on the label, so the switch reads the same to a screen reader as it looks. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
0fc2115973 |
[fix](trx-frontend-http): make map links work before the map has loaded
The AIS and APRS mini views link each position to the map, and neither did anything: the map module installs itself lazily, and it was the one defining window.navigateToAprsMap, so until something had opened the Map tab the global did not exist. AIS calls it inline from onclick and threw "not a function"; APRS guards the call and so failed silently. The grid links on FT8, FT4, FT2 and WSPR rows went the same way through navigateToMapLocator. The app owns both globals now, installed at startup. They record the target, switch tabs through navigateToTab — the only path that materialises the panel from its template, loads the module and updates the history entry, none of which the module's own hand-rolled tab switch did — and the target is applied once the module reports ready. The module keeps the focusing, which is its job, and exposes it as focusMapPosition and focusMapLocator. The smoke test now calls the link from a cold page, asserting the map module is not loaded first so the check cannot pass by accident. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
2c1df75d19 |
[fix](trx-frontend-http): measure auto squelch from the meter
Auto took the spectrum's noise floor and added 6 dB, but the threshold is compared against the channel level the meter reports, and the two sit a long way apart: the gap is set by the FFT size and window, the channel bandwidth, the decimation, and peak-versus-mean statistics. Measured on white noise it runs +22.1 dB at 48k/8k/3k, +18.7 dB at 240k/24k/12k and -1.2 dB at 1.92M/24k/12k — a 23 dB swing across ordinary configurations. Only the last of those is anywhere near right, so on a narrow span Auto set the gate some 20 dB below the noise and it never closed. It now reads the same number the DSP compares: the 20th percentile of the meter over the last ten seconds, plus 5 dB. The percentile keeps a burst of traffic inside the window from dragging the estimate up, and 5 dB clears the meter's own jitter, which measured 0.9-1.6 dB. Nothing in it converts between scales, so no part of the signal chain can put it out again. With no history yet — a fresh connection, a rig switch — it listens for a moment rather than refusing. The fixture gained a streaming /meter, without which there is nothing to measure, and the spectrum test pins auto to the meter it serves. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
aefd36c4b1 |
[feat](trx-frontend-http): set the squelch on the spectrum, in dB
The threshold is in dB, and since the squelch fix that is the scale the spectrum axis and the S-meter are labelled in — so the control belongs on the plot, at the level it gates. A dashed line spans the spectrum at its threshold with a grip that reads it out, dragged like the bandwidth edges, green while the signal is above it and amber while it gates. Arrow keys move it a dB at a time for anyone not using a mouse. The audio row keeps a compact version: the dB, an indicator lit from the same meter the DSP compares against, Auto, and an enable toggle that no longer doubles as the level. The slider ran 0-100% over that dB range, which gave the operator a number with nothing on screen to relate it to, and zero meant "disabled", so turning the squelch off to listen threw the threshold away. Auto now says which level it picked. Two things the browser could only show once it was on the plot: the grip landed underneath the split control at the right edge, which swallowed its pointer, and dragging to the foot of the axis hid the line — and the grip with it — instead of pinning it where it could be dragged back. The fixture could not exercise any of this: /audio answered 404, which hides the audio row and the control inside it, and the status carried no filter block, which is what tells the client the rig has a squelch at all. Both now look like an SDR, and the spectrum test drives the line. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
25b9c31c9b |
[fix](trx-backend-soapysdr): squelch against the meter, not the post-AGC level
The threshold was compared against the block level measured after the IQ AGC. Holding that level at a setpoint is the AGC's entire purpose, so for every mode that has one — FM, PKT, AIS, AM, SAM, which is to say the modes anyone squelches — the comparison was against a near-constant. With FM's 12 dB of gain a weak signal reads some 12 dB hotter than it is, and the value never had the decimation correction the meter applies on top of that: around 20 dB adrift at 48k/8k, more as decimation grows. The threshold arrives in the other scale entirely. The slider maps its percentage onto -120..-30 dB and Auto takes the spectrum noise floor plus 6, both of which are what the meter and the spectrum display show. So a gate set just above the noise sat open on it. It now reads last_signal_db, which is already computed each block before the AGC and corrected for decimation — the same number the meter shows. The post-AGC measurement had no other consumer. The test feeds one signal twice and takes the threshold from the channel's own meter: 6 dB above must gate it, 6 dB below must pass it. Nothing there depends on the absolute scale, only on the two agreeing. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
d68a84f7f9 |
[chore](trx-client): apply cargo fmt
Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
4fa191e9b6 |
[fix](trx-frontend-http): serve the band plan to every session
/bandplan.json needed the control role. Route access is decided by suffix for static assets — .js, .css, .png and so on — and ".json" is not among them, so the band plan matched nothing and fell through to the catch-all. It is compiled into the binary and identical for every user, so it is public now, like the rest of them. Two things followed from that. Read-only sessions never saw a band plan at all. And since the page asks for it during startup, the request can land before the session is established: that 401 was swallowed by an empty catch and never retried, which is why the allocations sometimes only appeared after a manual reload. So the client no longer hides the failure, retries once the auth gate clears — which is exactly when a startup 401 becomes fixable — and schedules a draw when the data lands, since the strip is painted from the spectrum draw and a rig sitting between frames would stay blank. The fixture can now refuse the first request the way the server did, and the spectrum layout test holds the client to recovering from it. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
c073d03ffb |
[feat](trx-frontend-http): reorder the controls tray sections
The radio's own settings now come first, then audio, then the scheduler: Advanced radio controls, Audio controls, Scheduler controls. The advanced section is not in the markup — ui-core builds it at runtime and gathers the SDR settings, virtual channel and TX limit rows into it, appending the result, which put it last however the markup was ordered. It is inserted ahead of the audio section instead. The signal readout and the TX meters stay where they are, between the controls and the sections: they are readouts rather than a section, and on an SDR the spectrum covers them anyway. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
730f129404 |
[fix](trx-frontend-http): let the header identity give way before the tabs
CI still put the tab strip into the controls, now at 1100px — the narrowest bar in the app, since the bookmark gutters take 9.5rem a side above that width and leave 756px against 871px at 900px. With the controls already in the overflow menu and the tabs already down to icons, nothing else could give, and what gives by default is the strip: it is the one item allowed to shrink below its content, so its tabs keep full width and slide under the controls, out of reach. The identity block takes the squeeze instead, ellipsised. A clipped station name is still readable; a destination hidden underneath the controls is not. The guard that was supposed to catch this scaled only the tabs and the controls, not the title and subtitles — which is exactly what runs out of room — and skipped 900px. It now scales every piece of text in the bar and checks all four widths. Measured across text scales from 1.0 to 3.0 at each width, the bar keeps its 16px allowance everywhere; before this, 1.6 and above overlapped at 1100px. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
f95f3d0104 |
[feat](trx-frontend-http): centre the radio controls, split off the mode row
The controls every rig has — mode, wheel, tune step, transmit — now sit as a centred block rather than packed against the left edge. What the current mode adds moves out from among them: WFM's six controls stretched the row sideways whenever it was active, pushing the wheel and the step pickers off centre, and SAM did the same on a smaller scale. They get a row of their own below a divider, which appears and leaves with them — an empty one would still take a track and a gap in the tray and draw its divider under controls it has nothing to do with. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
e70e82c8c0 |
[feat](trx-frontend-http): rebuild the general radio controls row
Mode was a full-width select: 483px of the row to display "FM". The modes are three or four characters and there are at most twelve, so they become a segmented group like the Unit and Step Scale pickers beside them — a third of the width, and one click instead of two. The <select> stays as the mode's value. A dozen call sites and several plugins read #mode.value, so replacing it outright would have reached much further than a layout change should; it is hidden from sight and from assistive tech, the buttons write to it, and everything downstream runs unchanged. Every writer re-syncs the buttons, the plugins through a new trxCore.syncModePicker. The row itself was a grid with a track per column, but the WFM, SAM and transmit columns are hidden on most rigs, so it ended in some 500px of hole. It packs left now. Same fault one level down: the power buttons sat in three fixed tracks, so a rig with neither transmit nor lock kept two empty ones and left its label chip stranded at the far edge. Unit and Step Scale move out of the frequency row and in beside the wheel and the +/- they modify, which were some 600px away. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
23cc0db1fa |
[fix](trx-frontend-http): drop the tabs to icons when the bar runs out of room
CI put the tab strip 9px into the controls at 1440px on a run that passed locally: its system font is wider, and the bar had no move left to make. Controls are moved into the overflow menu until the bar fits, but once all of them were in the menu nothing else gave — the nav may shrink below its content, so the tabs kept full width and ran under the controls, leaving the destinations nearest them unclickable. Labels dropping to icons was the other half of the answer, but it hung off a max-width:1360px media query and so was unavailable at 1440px. That class now goes on by measurement, as the last step after the menu is exhausted, which is the same reasoning the controls' own fit test already uses: how much fits depends on the rig name and on how wide the platform draws the labels, not on the viewport. The class is cleared before measuring so the decision cannot ratchet, and icon widths are fixed, so it always buys back the labels' width. Labels now stay put between 1100px and 1360px while they fit, with the style picker and theme toggle behind the overflow menu instead. The suite could not have caught this: it passed on the fonts of the machine that wrote it. The layout section now repeats its fit check with the bar's text scaled up, which reproduces a wider system font anywhere — with this fix reverted it fails on macOS too. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
657f952a2c |
[fix](trx-frontend-http): hold the strips' place above the spectrum
Tuning across a band edge moved the whole page under the cursor: the band plan strip is in flow, so a range with no allocations collapsed it from 18px to nothing and dragged every element below it up (measured at 1600x950: overview top 118 to 100, footer 1026 to 1008). It now keeps its height whenever a band plan could be drawn at all, and only gives it back when the feature is off, has no data, or there is no spectrum. The bookmark rail gets the same treatment for consistency, though it never moved anything — it is absolutely positioned over the top of the overview. It stays up and blank rather than vanishing. Which exposes something the rail was already doing wrong: it covers the top of the plot, and a bare div still takes pointer events, so whenever bookmarks were in range that band of the overview could not be dragged or scrolled. Only the chips are targets now. tests/spectrum-layout.mjs covers this: it streams spectrum frames, tunes between a band with bookmarks and allocations and one with neither, and asserts nothing moves and that the rail lets clicks through. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
1f256cbb68 |
[refactor](trx-frontend-http): extract the browser test fixture
browser-smoke.mjs carried its static server inline, which made it the only browser test that could exist: a second one would have had to copy 180 lines of routes to change a single capability flag. The server moves to tests/web-fixture.mjs behind startWebFixture(), with the rig's spectrum support, bookmarks and band plan as options. Serving a rig with a spectrum matters because that is where the layout actually lives — the panel, the strips above it and the waterfall are all gated on filter_controls, and the existing fixture reports a CAT-only rig, so none of it has ever been rendered under test. No change to what the smoke test checks. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
92fbdb692c |
[feat](trx-frontend-http): lay the scheduler controls out in one row
The controls were a column — release, then the step buttons, then the status line, then the entry on air last — which read bottom-up and left the entry that is actually transmitting furthest from the buttons that change it. They now run left to right: step through the entries, hand the rig back, then the current entry behind a separator. The separator is a pseudo-element on the current-entry block rather than an element of its own, because that block is display-toggled whenever fewer than two entries are active; a standalone rule would be left hanging with nothing after it. No ids move, so the enable/disable logic in the scheduler plugin and the release polling in vchan bind exactly as before. The smoke test asserts the row's order, which is also what keeps the separator in place. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
b2fbcb318d |
[fix](trx-frontend-http): stop Tools lighting up on every refresh
navigateToTab marked the Tools button by asking whether the destination tab was displayed, which is the right question at the wrong moment: the first route navigation runs while the card is still behind the loading state, where every tab computes to display:none. Refreshing or deep linking to any page therefore lit Tools alongside the real destination, and nothing re-evaluated it once the page appeared. Membership of the Tools menu answers the same question without needing anything laid out, and still reads the grouping ui-core installs rather than a second copy of it. The smoke fixture now serves the SPA shell for route paths the way the server's per-tab index handlers do, so a deep link no longer 404s and the case is testable at all; two of them are asserted. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
44721b579c |
[fix](trx-frontend-http): fill the map column down to the footer
The windowed map was capped at 75% of the viewport height and at a width-derived aspect ratio, which left a dead band under it: 69px at 1600x950, and on a 420px-wide phone a 270px map on an 800px screen. Neither cap was doing useful work now that the stage spans the full width, so the map fills the column down to the footer instead. Growing into the footer needs a bound: once the column is tall enough to push the footer below the fold, using its position would push it further on every pass, so the bottom edge is clamped to the viewport. Growth then consumes the column's spare height and settles in one pass. Also drops three mapIsFullscreen() branches in the windowed path that could never be taken — the fullscreen case returns above them. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
889d00007d |
[feat](trx-frontend-http): box the selected tab instead of underlining it
The desktop strip marked the current page with a 2px underline while the mobile bottom nav already boxed it, so one navigation model looked like two. The box now sits on both: a transparent 1px border on the base reserves it, so switching pages moves no neighbours, and hover fills a fainter version of the same shape. Tools carries it too — that button is marked active for the destinations the strip hides. Dropping the mobile rule's border-bottom:none, which only existed to cancel the old desktop underline, closes the bottom edge its active box had been missing. The smoke test checks all four edges. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
6f53592041 |
[feat](trx-frontend-http): rework the page footer
The footer floated in space below the content with no rule to close the page, its two clusters sat on a text baseline that left the source pill hanging, and the status hint was a plain line of text a size larger than the attribution beside it. Now a hairline closes the page the way .tab-bar opens it, the clusters centre on one line, and the attribution drops the opacity it stacked on top of --text-muted, which had put it below a readable contrast ratio. The status hint becomes a pill with a state dot: green when ready, amber while a command is in flight, red on connection loss. The colour comes from a data-state attribute, so every hint now goes through setPowerHint instead of assigning textContent directly. --status-ok carries the indicator green; .about-status-on picks it up too, which darkens it on light themes where the old value was barely legible. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjg
|
709939f60b |
[feat](trx-frontend-http): span the map across the full viewport width
The map stage broke out of the centred .card column: negative inline margins cancel the card's centring offset and its side padding, so the stage reaches both viewport edges at every width without hardcoding either value. Its rounded corners and left/right borders go with it — edge to edge, the panel reads as a band rather than a floating card. The browser smoke test now measures the stage against the viewport, and checks that the full-bleed width does not push the page sideways. Signed-off-by: Stan Grams <sjg@haxx.space> |
||
 sjgandClaude Opus 5
|
5b7dd493d4 |
[feat](trx-frontend-http): draw APRS symbols from the sprite sheets
CI / lint (pull_request) Successful in 2m16s
CI / test (pull_request) Successful in 8m12s
CI / frontend (pull_request) Successful in 3m2s
CI / reuse (pull_request) Successful in 3s
CI / lint (push) Successful in 2m24s
CI / test (push) Successful in 7m28s
CI / frontend (push) Successful in 2m11s
CI / reuse (push) Successful in 3s
Resolve a table/code pair to a sprite cell in aprs-shared, and use it from both the packet lists and the map markers, which had each been printing the raw symbol character in a bordered box. A table identifier of / or \ selects the primary or alternate sheet directly. Anything else is an overlay character, which the APRS spec draws on top of the alternate symbol -- so those stack the overlay sheet over the alternate one rather than picking a sheet. Codes outside 0x21..0x7E have no cell and keep the old character box. The sheet URLs stay in the stylesheet so a min-resolution query can swap in the retina sheets; only the cell offset is computed and set inline. Map markers share the helper through the plugin chunk, so the map stays free of any remote symbol fetch. Verified in a browser against the real stylesheet and sheets: /> is a car, /_ a WX circle, /& an igate diamond, \n a red triangle, and the overlays S> and 7# carry their character on the alternate symbol. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_018huL1ELyr86yVqfAabtioA Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjgandClaude Opus 5
|
02fe492dbf |
[feat](trx-frontend-http): serve the vendored APRS symbol sprites
Embed the six sheets alongside the other vendored assets and serve them under /vendor with the same immutable cache headers. The browser computes a symbol's cell from a 16x6 grid of 24px cells, so a re-vendored sheet at any other size would shift every station onto a neighbouring icon -- wrong on every packet, and invisible unless you know which glyph to expect. Pin the geometry by parsing each embedded PNG's IHDR in a test. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_018huL1ELyr86yVqfAabtioA Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjgandClaude Opus 5
|
1bc2c88e2f |
[chore](trx-rs): vendor the APRS symbol sprite sheets
The web UI had no symbol graphics at all, so a position report rendered its raw symbol character in a bordered box. Vendor rev H of the hessu/aprs-symbols set: three 24px sheets (primary, alternate, and the overlay characters) plus their retina variants. The set carries no single license. Individual symbols are variously vectorizations of the original WA8LMF bitmaps with unknown terms, new CC BY-SA work by OH7LZB, public-domain or CC sources, and a handful of brand logos owned by their companies. Record that as LicenseRef-APRS-Symbols with the upstream per-symbol catalogue copied verbatim, and carry the attribution pointer upstream asks for. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_018huL1ELyr86yVqfAabtioA Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjgandClaude Opus 5
|
863a6d8fd4 |
[fix](trx-frontend-http): restore decode history from the stored records
CI / lint (pull_request) Successful in 2m21s
CI / test (pull_request) Successful in 8m19s
CI / frontend (pull_request) Successful in 3m1s
CI / reuse (pull_request) Successful in 2s
CI / lint (push) Successful in 2m16s
CI / test (push) Successful in 7m26s
CI / frontend (push) Successful in 2m11s
CI / reuse (push) Successful in 2s
Replay required every restored record to carry a string `type`, and stored records do not have one: an AIS entry holds mmsi, lat, lon, crc_ok and its decoder's own fields, nothing more. The filter therefore discarded all of them, and did it silently — the fetch returned its full payload, the worker decoded it, and no error was logged, so the history simply never appeared. That field identifies live SSE frames, which do carry it, which is why only replay was affected. History arrives already grouped and the group's kind is delivered alongside the messages, so `type` was never needed to route them. Require only that a record is an object. Confirmed against a live server: the first restored group is AIS, and its records expose their decoder fields with `type` undefined. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01GdyUjuXejCEfiub675z6cz Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjgandClaude Opus 5
|
b252717f6b |
[test](trx-frontend-http): serve a realistic decoder registry to the smoke test
CI / lint (pull_request) Successful in 2m18s
CI / test (pull_request) Successful in 7m25s
CI / frontend (pull_request) Successful in 2m10s
CI / reuse (pull_request) Successful in 3s
CI / lint (push) Successful in 2m17s
CI / test (push) Successful in 7m26s
CI / frontend (push) Successful in 2m12s
CI / reuse (push) Successful in 3s
The fixture answered /decoders with an empty list, which hid most of the application from the only test that runs it in a browser. The decoder sub-tabs, their panels, the decode toggles and the bookmark decoder checkboxes are all built from that registry, so the run exercised three of thirteen sub-tabs and none of the decoder UI. Finding this needed route interception, because nothing in the suite could see it. Serve eleven decoders covering the modes the real registry spans. The run now builds 13 sub-tabs and 11 bookmark decoder checkboxes — the same checkboxes whose construction a recent fix changed without any test reaching them — and still reports no runtime errors. It also makes an existing fault observable: at 1100px the decoder sub-tab bar hides 195px of itself with no scrollbar or fade, the same silent truncation the top strip had. No assertion for it here, since that would fail until the truncation is fixed. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01GdyUjuXejCEfiub675z6cz Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjgandClaude Opus 5
|
92697b11c5 |
[feat](trx-frontend-http): mark Tools active for its destinations
CI / test (pull_request) Successful in 8m9s
CI / test (push) Successful in 7m22s
CI / lint (pull_request) Successful in 2m15s
CI / frontend (pull_request) Successful in 3m1s
CI / reuse (pull_request) Successful in 2s
CI / lint (push) Successful in 2m16s
CI / frontend (push) Successful in 2m10s
CI / reuse (push) Successful in 2s
Grouping Statistics, Recorder, Settings and About behind Tools left the tab strip looking identical on all four: the destination's own button carries the active class, but the strip hides that button, so nothing was marked. The page titles named the page without saying how you got there. Mark the Tools button when the active destination is one the strip hides. That state is read from the button's computed display rather than from a second copy of the grouping, so the two cannot drift: whatever ui-core puts in the menu lights up Tools, and a destination promoted back into the strip stops doing so with no further change. Tools already carries the tab class, so the existing active styling applies unchanged. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01GdyUjuXejCEfiub675z6cz Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjgandClaude Opus 5
|
b409c57296 |
[test](trx-frontend-http): assert header geometry in the browser smoke test
CI / test (push) Successful in 7m27s
CI / frontend (push) Successful in 3m1s
CI / reuse (push) Successful in 3s
CI / lint (pull_request) Successful in 2m16s
CI / test (pull_request) Successful in 7m24s
CI / frontend (pull_request) Successful in 2m11s
CI / reuse (pull_request) Successful in 2s
CI / lint (push) Successful in 2m15s
Several layout faults shipped while every gate passed, because nothing looked at geometry: a header whose height tracked the viewport, controls at four different heights, a tab strip that ran under the controls, and a dropdown that opened underneath the page. Assert the invariants behind those at four widths — the header stays one row, the tabs do not reach the controls, the controls share a height, the page does not scroll sideways — and that the menu renders with real dimensions and wins a hit test at its own centre. The overlap check measures the tabs rather than the strip: with the strip allowed to overflow, its box shrinks while its content paints across the controls, so the container's own rect never registers the collision. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01GdyUjuXejCEfiub675z6cz Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjgandClaude Opus 5
|
00191c8d7a |
[fix](trx-frontend-http): serve the Statistics and Bookmarks routes
CI / lint (pull_request) Successful in 2m18s
CI / frontend (pull_request) Successful in 3m1s
CI / reuse (pull_request) Successful in 2s
CI / lint (push) Successful in 2m17s
CI / test (pull_request) Successful in 8m23s
CI / test (push) Successful in 7m28s
CI / frontend (push) Successful in 2m9s
CI / reuse (push) Successful in 2s
The server answers /, /map, /digital-modes, /recorder, /settings and /about with the application shell, but never had a route for /statistics or /bookmarks. Both fell through to the catch-all asset handler, so reloading on either one downloaded a file instead of reopening the page. Only in-app navigation worked, which is why it went unnoticed until Statistics was reachable from the Tools menu. Add the two missing shell routes. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01GdyUjuXejCEfiub675z6cz Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjgandClaude Opus 5
|
56c363a517 |
[fix](trx-frontend-http): align the Statistics page and unblock the tab strip
Two faults, both mine, both visible in one screenshot of that page. #tab-statistics was the only panel with padding of its own, so its title and content sat 16px inside where every other page begins. Remove it and the page lines up with the header and with its siblings. Removing the tab strip's `overflow-x` left it unable to shrink below its content, so at around 1280px it ran under the controls: the Map tab sat beneath the audio button and Tools beneath REC. Clipping is safe again — the menus it anchors are reparented to the body when they open — so the strip can shrink, and the labels now give way to icons at 1360px rather than 1180px, before it has to clip anything. Measured at 1280px: 321px of clearance between the strip and the controls, and the page title at the same left edge as the header. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01GdyUjuXejCEfiub675z6cz Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjgandClaude Opus 5
|
5ad91b4ab6 |
[fix](trx-frontend-http): stop doubling the space under the Statistics title
CI / lint (pull_request) Successful in 2m17s
CI / test (pull_request) Successful in 8m13s
CI / frontend (pull_request) Successful in 3m1s
CI / reuse (pull_request) Successful in 3s
CI / lint (push) Successful in 2m20s
CI / test (push) Successful in 7m33s
CI / frontend (push) Successful in 2m12s
CI / reuse (push) Successful in 3s
The page titles carry a bottom margin, which is what spaces them from the content on the plain block panels. #tab-statistics is not one: it is a flex column with `gap: 1rem`, so the margin landed on top of that gap and left 28px under the title where every other page had 12px. Drop the margin on that panel and let its own gap do the spacing. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01GdyUjuXejCEfiub675z6cz Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjgandClaude Opus 5
|
1843522b45 |
[feat](trx-frontend-http): give the Tools destinations page titles
CI / lint (pull_request) Successful in 2m21s
CI / test (pull_request) Successful in 8m13s
CI / frontend (pull_request) Successful in 2m59s
CI / reuse (pull_request) Successful in 2s
CI / lint (push) Successful in 2m21s
CI / test (push) Successful in 7m30s
CI / frontend (push) Successful in 2m10s
CI / reuse (push) Successful in 3s
Recorder stated its name; Statistics, Settings and About did not, so one page in eight carried a title. The class it used, section-heading, had no rule behind it either, leaving even that title as a default h2. Which way to unify follows from the navigation change. The tab strip highlights the destination you are on, so Radio, Bookmarks, Digital modes and Map already say where you are and a title would repeat the strip while costing vertical space the spectrum wants. The four destinations behind Tools get no such highlight — the strip looks the same on all of them — so those are exactly the pages that have to name themselves. Give the three that were missing a heading, and style section-heading so all four match. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01GdyUjuXejCEfiub675z6cz Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjgandClaude Opus 5
|
41ddecf5a7 |
[fix](trx-frontend-http): label the overflow tab Tools and hide its glyph
CI / test (pull_request) Successful in 8m17s
CI / lint (push) Successful in 2m18s
CI / lint (pull_request) Successful in 2m16s
CI / frontend (pull_request) Successful in 3m6s
CI / reuse (pull_request) Successful in 3s
CI / test (push) Successful in 7m25s
CI / frontend (push) Successful in 2m11s
CI / reuse (push) Successful in 3s
The button rendered as "•••More": the dots span carried no styling at all, so the glyph sat flush against the label instead of behaving like the icon it is. Every other tab hides its icon while labels are shown and swaps to it when they are not; the dots now follow the same rule, so the button reads "Tools" beside the other labels and becomes the glyph alone in the icon band. "More" also said nothing about the destinations behind it. The menu holds Statistics, Recorder, Settings and About, so name it Tools and give the button an aria-label that spells that out. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01GdyUjuXejCEfiub675z6cz Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjgandClaude Opus 5
|
b06c37affa |
[fix](trx-frontend-http): lift the header menus out of the header
CI / lint (pull_request) Successful in 2m24s
CI / test (pull_request) Successful in 8m21s
CI / frontend (pull_request) Successful in 3m5s
CI / reuse (pull_request) Successful in 3s
CI / lint (push) Successful in 2m17s
CI / test (push) Successful in 7m36s
CI / frontend (push) Successful in 2m9s
CI / reuse (push) Successful in 3s
Fixed positioning escaped the clipping, but not the stacking: the header carries `z-index: 2`, which makes it a stacking context, so whatever z-index a menu inside it carries is confined below level 2. The spectrum overlays paint as high as 9600, so both dropdowns opened underneath them. Reparent each menu to the body when it opens. Leaving that subtree is the only way out of an ancestor's stacking context, and the menus are already positioned in viewport coordinates, so nothing else about them changes. The outside-click test now considers the menu as well as its wrapper, since the two are no longer nested. Verified by hit testing rather than by inspecting z-index: elementFromPoint at the open menu's centre returns the menu. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01GdyUjuXejCEfiub675z6cz Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjgandClaude Opus 5
|
b4912f5879 |
[fix](trx-frontend-http): render the header menus above the page
CI / lint (push) Successful in 2m17s
CI / test (push) Successful in 7m23s
CI / lint (pull_request) Successful in 2m16s
CI / test (pull_request) Successful in 8m13s
CI / frontend (pull_request) Successful in 2m59s
CI / reuse (pull_request) Successful in 3s
CI / frontend (push) Successful in 2m10s
CI / reuse (push) Successful in 3s
Both header dropdowns were laid out inside the bar rather than over the page. The navigation menu opened as an 18px sliver positioned above its own button, and the overflow menu did not appear at all. Two causes. The tab strip kept `overflow-x: auto` from when it scrolled, which clips an absolutely positioned descendant — and the strip is what the navigation menu anchors to. The strip no longer scrolls, since the occasional destinations moved behind More, so the property and the edge fade that went with it are both gone. Anchoring in fixed coordinates at open time addresses the general case: an absolutely positioned menu is clipped by any scrolling ancestor and trapped inside whatever stacking context its ancestors create, so it can be squashed inside the bar or painted underneath page content. Fixed coordinates answer to the viewport, and the menu flips above its button near the bottom edge. Clearing `right` when setting `left` keeps the menus at their natural width: the stylesheet pins them to the right of their anchor, and leaving that in place stretched them across the bar — 845px for a four-item list. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01GdyUjuXejCEfiub675z6cz Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjgandClaude Opus 5
|
27f2558193 |
[feat](trx-frontend-http): one navigation model at every width
CI / test (pull_request) Successful in 8m13s
CI / frontend (pull_request) Successful in 3m0s
CI / reuse (pull_request) Successful in 3s
CI / test (push) Successful in 7m25s
CI / lint (pull_request) Successful in 2m18s
CI / lint (push) Successful in 2m17s
CI / frontend (push) Successful in 2m9s
CI / reuse (push) Successful in 3s
Eight destinations sat flat in the tab strip with equal weight, competing with the controls for the same row and then scrolling out of reach with only a fade to say so. They are not equal: Radio is where an operator spends nearly all their time, Bookmarks, Digital modes and Map are operating surfaces, and Statistics, Recorder, Settings and About are occasional. The mobile layout already grouped them exactly that way, behind its More menu, so the application carried two navigation models. Adopt the mobile grouping at every width instead of adding a third: four operating tabs plus More. The strip no longer scrolls at any width, and the menu keeps its bottom-sheet placement on mobile while anchoring under its button elsewhere. Drop the labels between 701 and 1180px so the tabs degrade to their icons — which every tab already carries — before the strip could ever need to hide a destination. Rename Main to Radio: it is the receiver, not a generic first page, and the name now says what the destination is rather than where it sits. Freeing that width also let the style picker and theme toggle return to the bar inline, leaving only the layout picker in the overflow menu. Navigating to About in the browser smoke test now goes through More, as a person would. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01GdyUjuXejCEfiub675z6cz Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjgandClaude Opus 5
|
3a9bf1b7ce |
[fix](trx-frontend-http): drop the rig description from the top bar
The header repeated the active rig's hardware string and mode list beside the rig picker. With a real SDR that reads SoapySDR driver=airspyhf,serial=c852eb5dd23539f8 · RX · SDR filters · LSB · USB · CW · CWR · AM · +7 modes which is longer than every other control in the bar combined, and it is already on the About tab in full, split across its Rig, Active rig, Connection, Modes and VFO rows. Remove the element and the builder behind it. Rig switching keeps its feedback through the existing hint channel rather than by briefly rewriting a permanent label, and the identity that belongs in a header — the rig's display name — stays in the left subtitle. The freed width is not spent: the tab strip now reaches Settings before it needs to scroll, where it previously faded out during Statistics. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01GdyUjuXejCEfiub675z6cz Signed-off-by: Stan Grams <sjg@haxx.space> |
||
|
sjgandClaude Opus 5
|
dd5760c436 |
[style](trx-frontend-http): fade the scrolled tab strip edge
CI / lint (pull_request) Successful in 2m19s
CI / test (pull_request) Successful in 8m17s
CI / frontend (pull_request) Successful in 3m0s
CI / reuse (pull_request) Successful in 3s
CI / lint (push) Successful in 2m17s
CI / test (push) Successful in 7m33s
CI / frontend (push) Successful in 2m9s
CI / reuse (push) Successful in 3s
The page tabs scroll rather than wrap, so the last visible tab was sliced
mid-word ("Se…" for Settings), which reads as a rendering fault instead of
as an invitation to scroll.
Fade the trailing edge with a mask. A colour-matched cover gradient is
the usual trick, but the card is transparent, so a cover would have to
track the page background across both themes and all nine styles; a mask
is colour-agnostic. Only the trailing edge is faded, leaving the first
tab crisp while the strip sits at rest.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GdyUjuXejCEfiub675z6cz
Signed-off-by: Stan Grams <sjg@haxx.space>
|
||
|
sjgandClaude Opus 5
|
eee3630f04 |
[feat](trx-frontend-http): compact single-row top bar
The header's height depended on the viewport width, and not even monotonically: 112px at 1440, 169px at 1100, 131px at 900, 246px at 720. Both control groups wrapped, so every width produced a different ragged block — eight page tabs across four rows at 1100px, and action controls across three. Four different control heights (32, 34, 45 and 54px) sat in the same row, the 54px one being the rig picker with its summary stacked underneath, and on narrow viewports the icon buttons stretched to fill half the row, rendering a play triangle centred in a 249px box. Lay both groups out as one row that never wraps. Controls are a uniform 2rem and no longer stretch, the rig summary sits inline beside its select, and the page tabs scroll instead of wrapping. Secondary controls — layout, style and theme — move into an overflow menu when the bar cannot hold them, leaving audio, record and the rig picker inline. Deciding when they no longer fit needs natural widths, not rendered ones: the nav has min-width 0 and scrolls, so it always shrinks to the leftover space and always reports scrolling, and the bar reports overflow even when nothing is clipped. scrollWidth on the scroll container is its unconstrained content width, which is what the fit test compares against the space available. Measured after the change: 72px at 1440, 1280, 1100, 900 and 480, every control 32px, nothing clipped at any width. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01GdyUjuXejCEfiub675z6cz Signed-off-by: Stan Grams <sjg@haxx.space> |