sjg
b48cc23d6e
The picker and the header showed each rig's lowercase id instead of its configured name. applyRigList takes the names as a parameter defaulted to an empty map, and the state-update path passes only the rig ids — names come from /rigs, not from a state frame — so that call landed on the default and the body, which treats "an object" as "here are the names", cleared them. One frame after load the names were gone for the rest of the session. Omitted now means no news rather than no names. The fixture is why this was invisible: it pushed an identical status payload every tick and the client skips a frame equal to the last, so render never ran and neither did the call that did the damage. Its event stream varies between frames now, as a real one does. Which immediately caught a second fault: state frames arrive continuously, and one sent before the server applied a new squelch threshold snapped the line back to where it had just been dragged from. A local change outranks the echo for two seconds, the same idea as the optimistic frequency guard beside it. The fixture also records what /set_sdr_squelch sets and reports it back afterwards — the drag test had been passing against a server that ignored the write. Signed-off-by: Stan Grams <sjg@haxx.space>
trx-rs
A modular amateur radio control stack written in Rust.
trx-rs splits radio hardware access from user-facing interfaces so you can run
rig control, SDR DSP, decoding, audio streaming, and web access as separate,
composable pieces.
| Backends | Yaesu FT-817, Yaesu FT-450D, SoapySDR |
| Frontends | Web UI, rigctl-compatible TCP, JSON-over-TCP |
| Decoders | AIS, APRS, CW, FT8, RDS, VDES, WSPR |
| Audio | Opus streaming between server, client, and browser |
Quick Start
1. Install dependencies
Debian / Ubuntu
sudo apt install build-essential pkg-config cmake libopus-dev libasound2-dev
# Optional — SDR support
sudo apt install libsoapysdr-dev
Fedora
sudo dnf install gcc pkg-config cmake opus-devel alsa-lib-devel
# Optional — SDR support
sudo dnf install SoapySDR-devel
Arch Linux
sudo pacman -S base-devel pkgconf cmake opus alsa-lib
# Optional — SDR support
sudo pacman -S soapysdr
macOS (Homebrew)
brew install cmake opus
# Optional — SDR support
brew install soapysdr
See Build Requirements in the wiki for details on each library.
Note:
cmakeis required even when a system Opus library is installed. Theaudiopus_syscrate probes for Opus viapkg-config; if it is not found (orpkg-configis unavailable), it falls back to compiling a vendored copy of Opus with CMake. A missingcmaketherefore fails the build withis cmake not installed?rather than a missing-Opus error.
2. Build
cargo build --release
Build without SDR support: cargo build --release --no-default-features
3. Configure
Run the interactive setup wizard to generate config files for your station:
./target/release/trx-configurator
The wizard walks you through rig selection, serial port detection, audio
settings, and frontend options, then writes trx-server.toml and
trx-client.toml.
Alternatively, generate example configs and edit them by hand:
./target/release/trx-server --print-config > trx-server.toml
./target/release/trx-client --print-config > trx-client.toml
4. Run
./target/release/trx-server --config trx-server.toml
./target/release/trx-client --config trx-client.toml
Open the configured HTTP frontend address in a browser (default http://localhost:8080).
How It Works
graph TD
SDR1["SDR #1"] & SDR2["SDR #2"] <-->|USB| S1["trx-server A"]
SDR3["SDR #3"] & FT817["FT-817"] <-->|USB / serial| S2["trx-server B"]
S1 <-->|"JSON-TCP :4530"| C1["trx-client"]
S1 -->|"Opus-TCP per rig"| C1
S2 <-->|"JSON-TCP :4530"| C1
S2 -->|"Opus-TCP per rig"| C1
C1 <-->|internal channels| F1["Web UI :8080"]
C1 <-->|internal channels| F2["rigctl :4532"]
Each trx-server owns one or more rigs and runs DSP, decoding, and audio capture locally.
A trx-client connects to any number of servers over TCP and exposes them through
a unified set of frontends.
Documentation
| Resource | Description |
|---|---|
| User Manual | Configuration, features, and usage |
| Architecture | System design, crate layout, data flow, and internals |
| Optimization Guidelines | Performance guidelines for the real-time DSP pipeline |
| Planned Features | Roadmap and design notes |
| Contributing | Commit conventions, workflow, and code style |
License
GPL-2.0-or-later. See LICENSES for the full license text and
bundled third-party license files. Bundled third-party components retain their
original licenses: Leaflet is BSD-2-Clause, DSEG is OFL-1.1, and opus-decoder
is MIT. The APRS symbol sprites come from
hessu/aprs-symbols; their per-symbol
copyright status is catalogued in
LICENSES/LicenseRef-APRS-Symbols.txt.