sjgandClaude Opus 5
eee3630f04
The header's height depended on the viewport width, and not even monotonically: 112px at 1440, 169px at 1100, 131px at 900, 246px at 720. Both control groups wrapped, so every width produced a different ragged block — eight page tabs across four rows at 1100px, and action controls across three. Four different control heights (32, 34, 45 and 54px) sat in the same row, the 54px one being the rig picker with its summary stacked underneath, and on narrow viewports the icon buttons stretched to fill half the row, rendering a play triangle centred in a 249px box. Lay both groups out as one row that never wraps. Controls are a uniform 2rem and no longer stretch, the rig summary sits inline beside its select, and the page tabs scroll instead of wrapping. Secondary controls — layout, style and theme — move into an overflow menu when the bar cannot hold them, leaving audio, record and the rig picker inline. Deciding when they no longer fit needs natural widths, not rendered ones: the nav has min-width 0 and scrolls, so it always shrinks to the leftover space and always reports scrolling, and the bar reports overflow even when nothing is clipped. scrollWidth on the scroll container is its unconstrained content width, which is what the fit test compares against the space available. Measured after the change: 72px at 1440, 1280, 1100, 900 and 480, every control 32px, nothing clipped at any width. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01GdyUjuXejCEfiub675z6cz Signed-off-by: Stan Grams <sjg@haxx.space>
trx-rs
A modular amateur radio control stack written in Rust.
trx-rs splits radio hardware access from user-facing interfaces so you can run
rig control, SDR DSP, decoding, audio streaming, and web access as separate,
composable pieces.
| Backends | Yaesu FT-817, Yaesu FT-450D, SoapySDR |
| Frontends | Web UI, rigctl-compatible TCP, JSON-over-TCP |
| Decoders | AIS, APRS, CW, FT8, RDS, VDES, WSPR |
| Audio | Opus streaming between server, client, and browser |
Quick Start
1. Install dependencies
Debian / Ubuntu
sudo apt install build-essential pkg-config cmake libopus-dev libasound2-dev
# Optional — SDR support
sudo apt install libsoapysdr-dev
Fedora
sudo dnf install gcc pkg-config cmake opus-devel alsa-lib-devel
# Optional — SDR support
sudo dnf install SoapySDR-devel
Arch Linux
sudo pacman -S base-devel pkgconf cmake opus alsa-lib
# Optional — SDR support
sudo pacman -S soapysdr
macOS (Homebrew)
brew install cmake opus
# Optional — SDR support
brew install soapysdr
See Build Requirements in the wiki for details on each library.
Note:
cmakeis required even when a system Opus library is installed. Theaudiopus_syscrate probes for Opus viapkg-config; if it is not found (orpkg-configis unavailable), it falls back to compiling a vendored copy of Opus with CMake. A missingcmaketherefore fails the build withis cmake not installed?rather than a missing-Opus error.
2. Build
cargo build --release
Build without SDR support: cargo build --release --no-default-features
3. Configure
Run the interactive setup wizard to generate config files for your station:
./target/release/trx-configurator
The wizard walks you through rig selection, serial port detection, audio
settings, and frontend options, then writes trx-server.toml and
trx-client.toml.
Alternatively, generate example configs and edit them by hand:
./target/release/trx-server --print-config > trx-server.toml
./target/release/trx-client --print-config > trx-client.toml
4. Run
./target/release/trx-server --config trx-server.toml
./target/release/trx-client --config trx-client.toml
Open the configured HTTP frontend address in a browser (default http://localhost:8080).
How It Works
graph TD
SDR1["SDR #1"] & SDR2["SDR #2"] <-->|USB| S1["trx-server A"]
SDR3["SDR #3"] & FT817["FT-817"] <-->|USB / serial| S2["trx-server B"]
S1 <-->|"JSON-TCP :4530"| C1["trx-client"]
S1 -->|"Opus-TCP per rig"| C1
S2 <-->|"JSON-TCP :4530"| C1
S2 -->|"Opus-TCP per rig"| C1
C1 <-->|internal channels| F1["Web UI :8080"]
C1 <-->|internal channels| F2["rigctl :4532"]
Each trx-server owns one or more rigs and runs DSP, decoding, and audio capture locally.
A trx-client connects to any number of servers over TCP and exposes them through
a unified set of frontends.
Documentation
| Resource | Description |
|---|---|
| User Manual | Configuration, features, and usage |
| Architecture | System design, crate layout, data flow, and internals |
| Optimization Guidelines | Performance guidelines for the real-time DSP pipeline |
| Planned Features | Roadmap and design notes |
| Contributing | Commit conventions, workflow, and code style |
License
GPL-2.0-or-later. See LICENSES for the full license text and
bundled third-party license files. Bundled third-party components retain their
original licenses: Leaflet is BSD-2-Clause, DSEG is OFL-1.1, and opus-decoder
is MIT.