sjg
84a99a3636
AIS, VDES and both APRS decoders were listed under the map plugin group alone, so opening Digital modes and clicking AIS or APRS gave an empty panel reading "Connected, listening for packets" while the decodes piled up unprocessed in the plugin runtime. They appeared only if something had opened the Map tab first, which flushed the queue. There is also a map-data group naming exactly those four that nothing loads: the loader is called with tab names and no tab is called map-data. They load with the tab whose panels they fill now. map-core stays lazy, since their calls into it are optional and the Map tab can go on paying for Leaflet by itself. tests/decode-flow.mjs follows a decode from the wire to the map: an AIS vessel and an APRS beacon arrive on /decode, and it asserts both panels fill with the map module confirmed absent, the mini view names the vessel and offers a pin, following that pin lands on /map centred on the vessel, and both decoders leave a marker. Nothing exercised any of this before — the fixture served an empty decode stream, which is how the map links came to be broken for every decoder at once. The fixture stamps decodes as it sends them, since the client prunes anything outside the retention window, and repeats them, since the views collapse by vessel and need more than one frame to behave. Signed-off-by: Stan Grams <sjg@haxx.space>
trx-rs
A modular amateur radio control stack written in Rust.
trx-rs splits radio hardware access from user-facing interfaces so you can run
rig control, SDR DSP, decoding, audio streaming, and web access as separate,
composable pieces.
| Backends | Yaesu FT-817, Yaesu FT-450D, SoapySDR |
| Frontends | Web UI, rigctl-compatible TCP, JSON-over-TCP |
| Decoders | AIS, APRS, CW, FT8, RDS, VDES, WSPR |
| Audio | Opus streaming between server, client, and browser |
Quick Start
1. Install dependencies
Debian / Ubuntu
sudo apt install build-essential pkg-config cmake libopus-dev libasound2-dev
# Optional — SDR support
sudo apt install libsoapysdr-dev
Fedora
sudo dnf install gcc pkg-config cmake opus-devel alsa-lib-devel
# Optional — SDR support
sudo dnf install SoapySDR-devel
Arch Linux
sudo pacman -S base-devel pkgconf cmake opus alsa-lib
# Optional — SDR support
sudo pacman -S soapysdr
macOS (Homebrew)
brew install cmake opus
# Optional — SDR support
brew install soapysdr
See Build Requirements in the wiki for details on each library.
Note:
cmakeis required even when a system Opus library is installed. Theaudiopus_syscrate probes for Opus viapkg-config; if it is not found (orpkg-configis unavailable), it falls back to compiling a vendored copy of Opus with CMake. A missingcmaketherefore fails the build withis cmake not installed?rather than a missing-Opus error.
2. Build
cargo build --release
Build without SDR support: cargo build --release --no-default-features
3. Configure
Run the interactive setup wizard to generate config files for your station:
./target/release/trx-configurator
The wizard walks you through rig selection, serial port detection, audio
settings, and frontend options, then writes trx-server.toml and
trx-client.toml.
Alternatively, generate example configs and edit them by hand:
./target/release/trx-server --print-config > trx-server.toml
./target/release/trx-client --print-config > trx-client.toml
4. Run
./target/release/trx-server --config trx-server.toml
./target/release/trx-client --config trx-client.toml
Open the configured HTTP frontend address in a browser (default http://localhost:8080).
How It Works
graph TD
SDR1["SDR #1"] & SDR2["SDR #2"] <-->|USB| S1["trx-server A"]
SDR3["SDR #3"] & FT817["FT-817"] <-->|USB / serial| S2["trx-server B"]
S1 <-->|"JSON-TCP :4530"| C1["trx-client"]
S1 -->|"Opus-TCP per rig"| C1
S2 <-->|"JSON-TCP :4530"| C1
S2 -->|"Opus-TCP per rig"| C1
C1 <-->|internal channels| F1["Web UI :8080"]
C1 <-->|internal channels| F2["rigctl :4532"]
Each trx-server owns one or more rigs and runs DSP, decoding, and audio capture locally.
A trx-client connects to any number of servers over TCP and exposes them through
a unified set of frontends.
Documentation
| Resource | Description |
|---|---|
| User Manual | Configuration, features, and usage |
| Architecture | System design, crate layout, data flow, and internals |
| Optimization Guidelines | Performance guidelines for the real-time DSP pipeline |
| Planned Features | Roadmap and design notes |
| Contributing | Commit conventions, workflow, and code style |
License
GPL-2.0-or-later. See LICENSES for the full license text and
bundled third-party license files. Bundled third-party components retain their
original licenses: Leaflet is BSD-2-Clause, DSEG is OFL-1.1, and opus-decoder
is MIT. The APRS symbol sprites come from
hessu/aprs-symbols; their per-symbol
copyright status is catalogued in
LICENSES/LicenseRef-APRS-Symbols.txt.