sjg
09634eb851
The bar explained itself in prose: "All bands visible by default" sat between the chips and the next group, taking width the bar could not spare and reading as a stray line of text. An "All" chip says the same thing in a chip's width and gives the selection somewhere to be undone. Band chips also came up dimmed at the very moment every band was on the map -- an empty selection is no filter at all, so nothing is dimmed until something is picked. The path toggles drop their "On"/"Off" suffix, which cost most of a row and only repeated what their own highlight already said; state moves to aria-pressed and the tooltip. The rest is alignment. The rule dividing the buttons from the filters is drawn on the button block's edge, and a centred block left it floating as a stub beside a two-row bar; stacked, it lay down the left of a block that sits underneath. The labels sat at their natural widths, so each row's first control started somewhere different, and the two pairs of phase buttons differed in width, so the groups after them missed each other by four pixels. One gutter for every label, one width for both pairs, and the search field moved last where it can take the room the fixed-width groups leave. The map layout test now covers the chips, the divider's height and the rows' shared start. Signed-off-by: Stan Grams <sjg@haxx.space>
trx-rs
A modular amateur radio control stack written in Rust.
trx-rs splits radio hardware access from user-facing interfaces so you can run
rig control, SDR DSP, decoding, audio streaming, and web access as separate,
composable pieces.
| Backends | Yaesu FT-817, Yaesu FT-450D, SoapySDR |
| Frontends | Web UI, rigctl-compatible TCP, JSON-over-TCP |
| Decoders | AIS, APRS, CW, FT8, RDS, VDES, WSPR |
| Audio | Opus streaming between server, client, and browser |
Quick Start
1. Install dependencies
Debian / Ubuntu
sudo apt install build-essential pkg-config cmake libopus-dev libasound2-dev
# Optional — SDR support
sudo apt install libsoapysdr-dev
Fedora
sudo dnf install gcc pkg-config cmake opus-devel alsa-lib-devel
# Optional — SDR support
sudo dnf install SoapySDR-devel
Arch Linux
sudo pacman -S base-devel pkgconf cmake opus alsa-lib
# Optional — SDR support
sudo pacman -S soapysdr
macOS (Homebrew)
brew install cmake opus
# Optional — SDR support
brew install soapysdr
See Build Requirements in the wiki for details on each library.
Note:
cmakeis required even when a system Opus library is installed. Theaudiopus_syscrate probes for Opus viapkg-config; if it is not found (orpkg-configis unavailable), it falls back to compiling a vendored copy of Opus with CMake. A missingcmaketherefore fails the build withis cmake not installed?rather than a missing-Opus error.
2. Build
cargo build --release
Build without SDR support: cargo build --release --no-default-features
3. Configure
Run the interactive setup wizard to generate config files for your station:
./target/release/trx-configurator
The wizard walks you through rig selection, serial port detection, audio
settings, and frontend options, then writes trx-server.toml and
trx-client.toml.
Alternatively, generate example configs and edit them by hand:
./target/release/trx-server --print-config > trx-server.toml
./target/release/trx-client --print-config > trx-client.toml
4. Run
./target/release/trx-server --config trx-server.toml
./target/release/trx-client --config trx-client.toml
Open the configured HTTP frontend address in a browser (default http://localhost:8080).
How It Works
graph TD
SDR1["SDR #1"] & SDR2["SDR #2"] <-->|USB| S1["trx-server A"]
SDR3["SDR #3"] & FT817["FT-817"] <-->|USB / serial| S2["trx-server B"]
S1 <-->|"JSON-TCP :4530"| C1["trx-client"]
S1 -->|"Opus-TCP per rig"| C1
S2 <-->|"JSON-TCP :4530"| C1
S2 -->|"Opus-TCP per rig"| C1
C1 <-->|internal channels| F1["Web UI :8080"]
C1 <-->|internal channels| F2["rigctl :4532"]
Each trx-server owns one or more rigs and runs DSP, decoding, and audio capture locally.
A trx-client connects to any number of servers over TCP and exposes them through
a unified set of frontends.
Documentation
| Resource | Description |
|---|---|
| User Manual | Configuration, features, and usage |
| Architecture | System design, crate layout, data flow, and internals |
| Optimization Guidelines | Performance guidelines for the real-time DSP pipeline |
| Planned Features | Roadmap and design notes |
| Contributing | Commit conventions, workflow, and code style |
License
GPL-2.0-or-later. See LICENSES for the full license text and
bundled third-party license files. Bundled third-party components retain their
original licenses: Leaflet is BSD-2-Clause, DSEG is OFL-1.1, and opus-decoder
is MIT. The APRS symbol sprites come from
hessu/aprs-symbols; their per-symbol
copyright status is catalogued in
LICENSES/LicenseRef-APRS-Symbols.txt.