The previous SNR formula (cand->score * 0.5 - 29.0) used the adjacent
tone bin as a noise reference. On a crowded FT8 band that bin is often
occupied by another station, inflating the apparent noise floor by
10-15 dB and capping reported SNR at around -10 dB even for strong
signals.
Replace with ftx_post_decode_snr(): re-encode the decoded message to
obtain the exact per-symbol tone sequence, compare each signal bin
against the minimum of the remaining (noise-only) bins, average over
all valid symbols, and apply the WSJT-X 2500 Hz bandwidth correction
dynamically per protocol. This produces accurate SNR estimates for both
FT8 and FT4 regardless of band occupancy.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Primary bookmark was cramped at one grid column; Extra channels was
unnecessarily spanning the full row. Swap their grid-column spans so
the bookmark select gets full width and Extra channels sits in a
normal column alongside Label and Interleave.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Row gap 0.5→0.75rem and label-to-input gap 0.2→0.35rem, scoped
to #sch-entry-form so the bookmark form is unaffected.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Replace the inline always-visible add-row with a modal overlay
(same fixed + blurred-backdrop pattern as the bookmark add/edit
form). The "+ Add Entry" button opens the modal; each row now has
Edit and Remove buttons. Edit pre-fills the modal and updates the
entry in-place on save. CSS reuses the existing bookmark modal
selectors rather than duplicating rules.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Opus is the sole audio format. Removes all FLAC references, the
format config key, the claxon/flac dependency row, and the
FLAC-encoder open question.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add NEON (aarch64) vectorized paths mirroring the existing AVX2 paths:
- demod/math_arm.rs: replace the no-op placeholder with a full NEON FM
discriminator that processes 4 samples per iteration using a 7th-order
minimax atan polynomial and branchless atan2 with argument reduction,
matching the accuracy of the AVX2 path (max error ~2.4e-7 rad).
32-bit ARM retains the scalar fallback.
- dsp/filter.rs: add mul_freq_domain_neon() that deinterleaves 4 complex
pairs via vuzpq/vzipq, performs complex multiply with vmulq/vaddq/vsubq,
then reinterleaves. On aarch64 this path is always taken (NEON is
mandatory); scalar fallback remains for other targets.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add a new "Strongest decoded signal" section below the existing
"Longest decode paths" section on the map tab, showing the top 5
stations with the highest SNR across the current map history window.
Reuses existing map-qso-card styling with SNR displayed in place of
distance.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Replace the always-None stub with a full decode pipeline:
- Bit-reversal deinterleave of 4-FSK symbols (data_bit = symbol >> 1)
- Fano sequential decoder for K=32, rate-1/2 convolutional code
(polynomials 0xF2D05351 / 0xE4613C47, 100k-cycle budget)
- Payload unpack: 28-bit callsign (mixed-radix N1), 15-bit Maidenhead
grid (M1 formula), 7-bit power code (dBm + 64)
- Validity checks on callsign, grid, and power range
- Round-trip unit test for K1JT FN20 37
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
clamp_bandwidth_for_mode now floors AMC bandwidth at 9 kHz so that both
the sum (L+R) and difference (L−R) sidebands are always captured,
regardless of what the user or a set_filter call requests.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
RigMode::AMC was implemented but omitted from the supported_modes vec,
so the HTTP frontend never received it in capabilities and the mode
selector did not show AMC-QUAM.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
- remote_client tests: add missing server_connected field and import
AtomicBool in the test module
- pskreporter: replace map_or(true, …) with is_none_or and
repeat(x).take(n) with repeat_n(x, n)
- dsp.rs, scheduler.rs: suppress intentional too_many_arguments with
#[allow(clippy::too_many_arguments)]
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add a RigMode::AMC arm to encode_mode returning an Err so that
attempting to set C-QUAM on the FT-450D returns a descriptive error.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add RigMode::AMC to the None return arm of encode_mode so that
attempting to set C-QUAM on the FT-817 returns a descriptive error
rather than a compile-time non-exhaustive match.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add "AMC-QUAM" to the MODE_BW_DEFAULTS table in app.js with the same
bandwidth settings as AM (9 kHz default, 500 Hz min, 20 kHz max, 500 Hz
step). Add an <option value="AMC-QUAM"> to the bookmark datalist in
index.html.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add RigMode::AMC arm to default_audio_bandwidth_for_mode, returning
9_000 Hz (same as AM).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add CquamDemod (demod/amcquam.rs) with first-order IIR carrier phase
tracker (τ = 50 ms) that rotates baseband IQ to align I with the sum
audio and Q with the difference audio, then DC-blocks each channel to
yield L/R stereo PCM.
Wire AmCQuam into the Demodulator enum, add ChannelDsp::cquam_decoder
field initialized for RigMode::AMC, and insert the C-QUAM audio path
between the WFM and fallback branches in process_block. Update all
mode-dispatch tables (agc_for_mode, iq_agc_for_mode, dc_for_mode,
default_bandwidth_for_mode, lib.rs, vchan_impl.rs) with AMC arms.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add parse_mode and mode_to_string support for RigMode::AMC, accepting
"AMC-QUAM", "AMC_QUAM", and "AMC" as input strings and serializing to
"AMC-QUAM". Add test cases for round-trip correctness.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
setRigFrequency applied applyLocalTunedFrequency before the network
round-trip, leaving the spectrum view shifted to the new frequency even
when the POST was rejected (e.g. 403 when the user loses control access).
Save the previous frequency and restore it in the catch block so the UI
stays aligned with the actual server-side state.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Show a full-screen blurred overlay (reusing decode-history-overlay styles)
when the SSE connection to trx-client drops or when trx-server is reported
unreachable via server_connected=false. The overlay distinguishes the two
failure modes with separate titles and sub-text. It is dismissed on
es.onopen (trx-client back) or when a message with server_connected!=false
arrives (trx-server back), and cleared on explicit disconnect/logout.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
decodeSource.onerror terminated the history worker but never called
flushLiveBuffer(), leaving historySettled=false and the "Loading decode
history…" overlay stuck on screen when trx-client breaks. Call
flushLiveBuffer() in the error path so the overlay is dismissed and the
powerHint connection-lost message is visible to the user.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
querySelectorAll("span") was picking up the inner .spectrum-bookmark-name
spans added in the previous commit, causing chips[i] to map to the wrong
element during left-position assignment. Switch to :scope > span to
select only direct-child chip spans.
Also revert axis bar from height:auto (which breaks the CSS transition and
collapses the bar) to height:38px with overflow:visible to accommodate
two-line labels while keeping the open/close animation intact.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Suppress stroke-dashoffset animation and drop-shadow filter on all
contact/radio paths when decodeContactPaths.size > 20 by toggling
.map-paths-static on #aprs-map, avoiding per-frame GPU compositing
with large decode histories.
Wrap non-sideStack bookmark chip labels in
<span class="spectrum-bookmark-name"> and allow word-break on axis
chips so long names split across two lines instead of being clipped.
Axis bar switches to min-height so it grows to fit taller chips.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
When the SSE stream drops (onerror or 15s heartbeat timeout) show
"trx-client connection lost, retrying…". When the stream is live but
server_connected is false, show "trx-server connection lost".
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add server_connected bool to FrontendMeta and inject it into every
/status and /events payload so the browser can distinguish between
trx-client and trx-server connection loss.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Store server_connected in RemoteClientConfig and set it true when
handle_connection begins, false when it returns. Wire the Arc clone
from FrontendRuntimeContext into the config at startup.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Track whether the remote client currently has an active TCP connection
to trx-server via a shared AtomicBool. Frontends can read this to
surface a distinct "trx-server connection lost" message.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Side-panel chips used white-space: normal + word-break: break-word,
causing names longer than ~16 characters to wrap onto a second line.
Switch to nowrap + overflow: hidden + text-overflow: ellipsis so long
names are clipped cleanly in a single line.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Drop FirTapsQuery, the set_fir_taps handler, and its service
registration. Tap count is no longer user-configurable.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Drop fir_taps field from SdrChannelConfig and its default. Remove the
SetFirTaps dispatch arm from rig_task. The DSP layer now auto-calculates
tap count from audio_bandwidth_hz.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Replace the static fir_taps parameter with auto_taps(cutoff_norm) which
computes ceil(3.32 / cutoff_norm).clamp(63, 16383). This ensures the
filter transition band equals one passband width regardless of SDR sample
rate, giving correct image rejection when the user sets audio_bandwidth_hz.
At 912 ksps with 3 kHz audio bandwidth this yields ~2018 taps instead
of the previous hardcoded 64, eliminating the 114 kHz stopband gap that
caused adjacent-band signals to alias into the audio output.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Drop SetFirTaps ClientCommand variant and its mapping to/from
RigCommand. Remove fir_taps from RigFilterState codec tests.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Drop the SetFirTaps RigCommand variant, remove the set_fir_taps default
trait method from Rig, and remove the fir_taps field from RigFilterState.
Tap count is now derived automatically from audio bandwidth in the DSP
layer rather than being a user-facing control.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add read_named_gain to IqSource (default: None) and implement it in
RealIqSource via Device::gain_element. Read the "LNA" element before
boxing the source so the initial sdr_lna_gain_db reflects the actual
hardware state, making the UI control visible and correct on first
connect. Devices without an LNA element (e.g. RTL-SDR with "TUNER")
return None and the control stays hidden.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add POST /set_sdr_lna_gain endpoint. Add an LNA Gain input+Set button
to the SDR settings row, styled identically to RF Gain. The control is
hidden until the server reports a sdr_lna_gain_db value (i.e. devices
that expose an LNA gain element). AGC disables it alongside RF Gain.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Handle RigCommand::SetSdrLnaGain by calling set_sdr_lna_gain on the
rig and refreshing filter state, matching the pattern used by
SetSdrGain and SetSdrAgc.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add set_named_gain to the IqSource trait and implement it in
RealIqSource via soapysdr Device::set_gain_element. Wire a
lna_gain_cmd channel through SdrPipeline so the IQ read loop applies
LNA gain changes on the next iteration. Add set_sdr_lna_gain to
SoapySdrRig and expose the current value via filter_state.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Map ClientCommand::SetSdrLnaGain { gain_db } to and from
RigCommand::SetSdrLnaGain in both directions.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add RigCommand::SetSdrLnaGain(f64), the corresponding default RigCat
trait method set_sdr_lna_gain, and an sdr_lna_gain_db: Option<f64>
field to RigFilterState for backends that expose a named LNA gain
element.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Replace vol-label with wfm-control on the Hardware AGC checkbox so its
label typography and alignment match the RF Gain control. Change the
outer container to align-items: flex-end so controls bottom-align.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Use a wider FT4 time-offset search range in candidate acquisition\nso decode remains robust with current pipeline latency.\n\nCo-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Use millisecond-based slot indexing for FT4 decode windows in\nforeground and background decoders to avoid premature 7s resets.\n\nCo-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Use an FT2-specific raw sample window and candidate acquisition path.
Keep the build clean by removing the stale monitor warning.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Use FT2-specific analysis settings and a wider receive span.
Switch server-side FT2 decoding to a rolling async window.
Widen FT2 candidate timing search in the vendored decoder.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Implement a distinct FT2 protocol path in the decoder stack and align\nits timing with the confirmed FT2 framing used by Decodium.\n\nCo-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
The function handles FT8, FT4, and WSPR locators so the ft8 prefix
was misleading. Updated all call sites in app.js, ft8.js, ft4.js,
and wspr.js.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
- Add ft4 to DEFAULT_MAP_SOURCE_FILTER (visible by default)
- Add ft4 hue to locatorThemeHues (peakHue + 30° offset from FT8)
- Propagate ft4 through locatorSourceLabel, locatorFilterColor,
locatorHueForEntry, isLocatorOverlay, applyMapFilter,
ensureDecodeLocatorMarker, pruneLocatorEntry, rebuildDecodeContactPaths,
clearMapMarkersByType, markerSearchText, navigateToMapLocator, and
the source items chip row
- ft8MapAddLocator now maps type="ft4" to markerType="ft4" so FT4
locators get their own distinct marker colour and filter chip
- ft4.js: pass "ft4" (not "ft8") to ft8MapAddLocator
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
bmReadDecoders, bmWriteDecoders, and bmApply were all missing FT4,
so the decoder checkbox was never saved and tuning a bookmark never
toggled the FT4 decoder state.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Decouple the longest-QSO summary from the contact path render toggle.
Keep the summary filtered by current map visibility while the toggle only
controls whether path overlays are drawn.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
CPAL error callbacks can fire millions of times per second on ALSA
EPIPE (errno -32). Previously each invocation did a string allocation
and mutex lock, saturating CPU and eventually crashing the server.
- Use atomic swap in both input and output error callbacks so only the
first error fires the expensive log+notify path; all subsequent hits
cost a single atomic op and return immediately.
- Replace stream.play()? with explicit error handling in run_playback
so a play failure triggers stream recreation instead of permanently
terminating the playback thread.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <stanislawgrams@gmail.com>
Change default remote connection port from 4532 to 4530 and audio
server_port from 4533 to 4531.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <stanislawgrams@gmail.com>
Change JSON TCP listener default from 4532 to 4530 and audio
streaming default from 4533 to 4531.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <stanislawgrams@gmail.com>
Fix authenticated refresh by restoring tab visibility during startup, and retune dark mode toward deep blue with amber-red accents.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add compile-time build dates for trx-server and trx-frontend-http, propagate server build metadata through rig state/snapshot, and render both versions + build dates in the HTTP footer.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Enable sig-clear-btn for RX users since clearing signal measurements
is a local UI operation that doesn't affect rig state.
Only disable decode history clear buttons:
- aprs-clear-btn
- ft8-clear-btn
- wspr-clear-btn
- cw-clear-btn
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Replace separate theme and auth buttons with a visually connected
button group. Buttons are grouped with no gap between them and
rounded corners only on the outer edges, creating a cohesive control.
Features:
- First button: rounded left edges
- Last button: rounded right edges
- Middle buttons: sharp edges (if more added)
- Negative margin to overlap borders smoothly
- Hover effect for feedback
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
After logging in, automatically show the Main tab-panel and mark
the Main tab button as active. Previously, users had to click the
Main tab to see content after login.
hideAuthGate() now:
- Shows the Main tab-panel
- Hides all other tab-panels
- Marks the Main tab button as active
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
When logout is clicked from the About tab, hide all tab panels to
prevent tab content from showing behind the login window.
Also ensures auth gate is displayed cleanly without any stray content
visible behind it.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Disable all decode history clear buttons for rx-authenticated users:
- APRS clear
- FT8 clear
- WSPR clear
- CW clear
- Signal clear
These are control operations that should be restricted to full access.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
After logout, check if guest mode is available and show the
"Continue as Guest" button if no rx_passphrase is configured.
Previously, authLogout() always passed false to showAuthGate(),
hiding the guest button.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
When rx_passphrase is not set, RX users have an implicit role without
a session. They should get 403 on control endpoints, not 401.
Previously, unrestricted RX users (with no session) trying control
endpoints would get 401 Unauthorized, triggering login redirect.
Now they get 403 Forbidden with "Insufficient permissions" hint.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Fix auth middleware to return correct HTTP status codes:
- 401 Unauthorized: No session (not authenticated)
- 403 Forbidden: Has session but insufficient role
Previously, all auth errors returned 401, which caused the frontend
to redirect rx users to login when they tried control endpoints.
Now rx users scrolling jog wheel/frequency will get a "Insufficient
permissions" hint instead of being redirected to login.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Remove duplicate logout button from About tab. Use only the header
Login/Logout button for unified authentication control.
The About tab now shows the authentication badge (when logged in)
without the redundant logout button.
Single login view:
- Auth gate with Login form + Continue as Guest button (when no rx pass)
- Header Login/Logout button for quick access
- Auth badge in About tab showing current role
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Only redirect to login on 401 (unauthenticated). For 403 errors
(authenticated but insufficient role), let the caller handle the error.
This prevents rx-authenticated users from being redirected to login
when they attempt to scroll the jog wheel or frequency input, which
tries to call /set_freq (a control-only endpoint).
RX users will now see "Insufficient permissions" hint instead of
being sent to login screen.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Fix logout flow to properly show auth gate and clear form. Also
disable additional controls for rx role:
- Jog wheel (faded out)
- Jog up/down buttons
- VFO selector buttons
For rx-authenticated users, all frequency/mode adjustment controls
are now properly disabled to prevent accidental changes.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Replace location.reload() with disconnect() + auth gate to prevent
browser hang when logging out. The full page reload was causing
issues with resource loading and event source reconnection timers.
Changes:
- Add disconnect() function to cleanly close EventSource connections
and clear all timers (esHeartbeat, reconnectTimer)
- authLogout() now disconnects locally and shows auth gate instead
of reloading the page
- Faster logout experience without full page reload
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add a Login/Logout button in the header next to the theme toggle,
styled consistently with the theme button. Button behavior:
- When logged in: Shows "Logout" with confirmation
- When not logged in: Shows "Login" to open auth gate
- Visible when on main app (not in auth gate)
- Same theme-toggle-btn styling
Provides quick access to authentication controls without needing to
navigate to the About tab.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Do not auto-connect with guest role. Always show the auth gate when
there's no valid session, allowing the user to choose between:
- Login: Enter passphrase for control access
- Continue as Guest: Proceed with read-only access (if available)
This allows users to enter their control passphrase instead of being
forced into guest mode.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
When RX access is unrestricted (no rx_passphrase required), show
a "Continue as Guest" button on the auth gate to allow immediate
access without requiring login. The button is only shown when guest
mode is available.
Guest mode:
- No authentication required
- Grants rx role immediately
- Can monitor radio but cannot transmit
Login path still available for full control access.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
sjgandClaude Sonnet 4.6