# trx-rs Combined Configuration File
#
# Copy this file to one of:
#   ./trx-rs.toml                       (current directory)
#   ~/.config/trx-rs/trx-rs.toml        (user config)
#   /etc/trx-rs/trx-rs.toml             (system-wide)
#
# Or use per-binary files (trx-server.toml / trx-client.toml) without the
# section headers — both formats are supported and the section headers may
# also appear in any per-binary file passed via --config.
#
# CLI arguments override config file values.

# =============================================================================
# trx-server — connects to radio hardware, exposes a JSON/audio TCP server
# =============================================================================

[trx-server.general]
# Callsign or station identifier
callsign = "N0CALL"

# Log level: trace, debug, info, warn, error
# log_level = "info"

[trx-server.rig]
# Rig model: ft817 (more models coming)
model = "ft817"
# Initial frequency (Hz) before first CAT read
initial_freq_hz = 144300000
# Initial mode before first CAT read (LSB, USB, CW, CWR, AM, WFM, FM, DIG, PKT)
initial_mode = "USB"

[trx-server.rig.access]
# Access type: "serial" or "tcp"
type = "serial"

# Serial port settings (when type = "serial")
port = "/dev/ttyUSB0"
baud = 9600

# TCP settings (when type = "tcp")
# host = "192.168.1.100"
# tcp_port = 4532

[trx-server.behavior]
# Polling interval when idle (milliseconds)
poll_interval_ms = 500

# Polling interval when transmitting (milliseconds)
poll_interval_tx_ms = 100

# Maximum retry attempts for transient errors
max_retries = 3

# Base delay for exponential backoff (milliseconds)
retry_base_delay_ms = 100

[trx-server.listen]
# Enable the JSON TCP listener for client connections
enabled = true

# IP address to listen on (use "0.0.0.0" for all interfaces)
listen = "127.0.0.1"

# TCP port to listen on
port = 4530

[trx-server.listen.auth]
# Authentication tokens (empty = no auth required)
tokens = []

[trx-server.pskreporter]
# Enable uploads of decoded FT8/WSPR spots to PSK Reporter
enabled = false

# PSK Reporter endpoint (UDP)
host = "report.pskreporter.info"
port = 4739

# Optional receiver locator (4 or 6-char Maidenhead).
# If omitted, it is derived from [trx-server.general] latitude/longitude.
# receiver_locator = "JO93"

[trx-server.aprsfi]
# Enable APRS-IS IGate uplink (forwards received RF APRS packets to APRS-IS / aprs.fi)
enabled = false

# APRS-IS server (rotate.aprs.net does DNS round-robin across all tier-2 servers)
host = "rotate.aprs.net"
port = 14580

# APRS-IS passcode. -1 = auto-computed from [trx-server.general] callsign.
# passcode = -1

[trx-server.decode_logs]
# Optional decoder message logs to files (APRS/CW/FT8/WSPR)
enabled = false

# Base directory for decoder logs.
# Default (if omitted): $XDG_DATA_HOME/trx-rs/decoders
# Fallback: logs/decoders
# dir = "/path/to/decoder-logs"

# Per-decoder log file names (supported tokens: %YYYY% %MM% %DD%)
aprs_file = "TRXRS-APRS-%YYYY%-%MM%-%DD%.log"
cw_file = "TRXRS-CW-%YYYY%-%MM%-%DD%.log"
ft8_file = "TRXRS-FT8-%YYYY%-%MM%-%DD%.log"
wspr_file = "TRXRS-WSPR-%YYYY%-%MM%-%DD%.log"

# --- SoapySDR backend example ---
# To use an SDR device instead of a physical transceiver, set:
#
# [trx-server.rig]
# model = "soapysdr"
# initial_freq_hz = 14074000
# initial_mode = "USB"
#
# [trx-server.rig.access]
# type = "sdr"
# args = "driver=rtlsdr"
#
# [trx-server.sdr]
# sample_rate      = 1920000
# bandwidth        = 1500000
# center_offset_hz = 200000
#
# [trx-server.sdr.gain]
# mode  = "auto"
# value = 30.0
#
# [[trx-server.sdr.channels]]
# id               = "primary"
# offset_hz        = 0
# mode             = "auto"
# audio_bandwidth_hz = 3000
# decoders         = ["ft8", "cw"]
# stream_opus      = true
#
# [[trx-server.sdr.channels]]
# id               = "wspr"
# offset_hz        = 21600
# mode             = "USB"
# audio_bandwidth_hz = 3000
# decoders         = ["wspr"]
# stream_opus      = false

# =============================================================================
# trx-client — connects to trx-server and exposes user-facing frontends
# =============================================================================

[trx-client.general]
# Callsign or station identifier displayed in frontends
callsign = "N0CALL"

# Log level: trace, debug, info, warn, error
# log_level = "info"

[trx-client.remote]
# Remote trx-server URL (host:port)
url = "192.168.1.100:9000"
# Optional target rig ID on a multi-rig server (omit to use server default rig)
# rig_id = "hf"

# Poll interval in milliseconds
poll_interval_ms = 750

[trx-client.remote.auth]
# Bearer token for authenticating with the remote server
token = "my-token"

[trx-client.frontends.http]
# Enable HTTP/REST frontend with SSE for real-time updates
enabled = true
listen = "127.0.0.1"
port = 8080

[trx-client.frontends.http.auth]
# Optional passphrase-based authentication for the HTTP frontend
# Disabled by default to preserve backward compatibility

# Enable authentication (default: false)
enabled = false

# Read-only passphrase: grants access to status/events/audio (rx role)
# Leave unset to disable rx access
# rx_passphrase = "rx-only-passphrase"

# Full control passphrase: grants access to all endpoints including TX/PTT (control role)
# Leave unset to disable control access
# control_passphrase = "full-control-passphrase"

# Enforce TX/PTT access control (default: true)
# When true, TX/PTT endpoints return 404 to authenticated users without control role
tx_access_control_enabled = true

# Session time-to-live in minutes (default: 480 = 8 hours)
session_ttl_min = 480

# Set Secure flag on session cookie (default: false)
# Should be true if served over HTTPS; false for HTTP/localhost
cookie_secure = false

# Cookie SameSite attribute: Strict, Lax (default), or None
cookie_same_site = "Lax"

[trx-client.frontends.rigctl]
# Enable rigctl-compatible TCP interface (hamlib compatible)
enabled = false
listen = "127.0.0.1"
port = 4532

[trx-client.frontends.http_json]
# Enable JSON-over-TCP control interface
enabled = true
listen = "127.0.0.1"
# Set to 0 to bind an ephemeral port
port = 0
# List of accepted bearer tokens (empty = no auth)
# auth.tokens = ["example-token"]

[trx-client.frontends.audio]
# Enable remote audio stream and decode transport
enabled = true
# Remote trx-server audio port
server_port = 4531
# Optional per-rig audio ports for multi-rig servers:
# rig_ports.ft817 = 4531
# rig_ports.airspyhf = 4532

[trx-client.frontends.audio.bridge]
# Enable local cpal bridge for WSJT-X virtual audio routing
enabled = false
# Optional exact output device name for RX playback
# rx_output_device = "BlackHole 2ch"
# Optional exact input device name for TX capture
# tx_input_device = "BlackHole 2ch"
# Playback/capture gain multipliers
rx_gain = 1.0
tx_gain = 1.0