# trx-rs example configuration
#
# Generated from the config structs; regenerate with:
#     cargo run -p trx-config --example generate_example
#
# Both sections are optional: trx-server reads [trx-server], trx-client reads
# [trx-client], and either may live in its own file with the section header
# omitted.  Any string may use ${ENV_VAR}, and credentials may be moved out of
# this file with the matching *_file keys.
#
# Check a config without starting anything:
#     trx-server --check-config --config trx-rs.toml
#     trx-client --check-config --config trx-rs.toml

# Server: drives the radio hardware.
[trx-server]
rigs = []

# Station identity.  Coordinates feed PSKReporter and the map.
[trx-server.general]
callsign = "N0CALL"
log_level = "info"
latitude = 52.2297
longitude = 21.0122

# Single-rig layout.  For several radios, delete this and use [[rigs]].
[trx-server.rig]
model = "ft817"
initial_freq_hz = 144300000
initial_mode = "USB"

# How to reach the radio: serial, tcp, or sdr.
[trx-server.rig.access]
type = "serial"
port = "/dev/ttyUSB0"
baud = 9600

# CAT polling and retry behaviour.
[trx-server.behavior]
poll_interval_ms = 500
poll_interval_tx_ms = 100
max_retries = 3
retry_base_delay_ms = 100
vfo_prime = true

# JSON control listener that trx-client connects to.
[trx-server.listen]
enabled = true
listen = "127.0.0.1"
port = 4530

# Tokens clients must present.  Empty means no authentication.
# Use tokens_file = "/etc/trx-rs/tokens" to keep them out of this file.
[trx-server.listen.auth]
tokens = []

# Opus audio stream for trx-client.
[trx-server.audio]
enabled = true
listen = "127.0.0.1"
port = 4531
rx_enabled = true
tx_enabled = true
sample_rate = 48000
channels = 2
frame_duration_ms = 20
bitrate_bps = 256000

# Report FT8/FT4/WSPR spots to pskreporter.info.
[trx-server.pskreporter]
enabled = false
host = "report.pskreporter.info"
port = 4739

# Forward received APRS frames to APRS-IS.
[trx-server.aprsfi]
enabled = false
host = "rotate.aprs.net"
port = 14580
passcode = -1
beacon = false
beacon_interval_secs = 1200
beacon_symbol_table = "/"
beacon_symbol_code = "-"

# Write decodes to JSON Lines files.
[trx-server.decode_logs]
enabled = false
dir = "/var/lib/trx-rs/decoders"
aprs_file = "TRXRS-APRS-%YYYY%-%MM%-%DD%.log"
cw_file = "TRXRS-CW-%YYYY%-%MM%-%DD%.log"
ft8_file = "TRXRS-FT8-%YYYY%-%MM%-%DD%.log"
wspr_file = "TRXRS-WSPR-%YYYY%-%MM%-%DD%.log"
wefax_file = "TRXRS-WEFAX-%YYYY%-%MM%-%DD%.log"

# Which decoders run.  Trimming this list saves real CPU on small boxes.
# Valid names: aprs, aprs_hf, ais, cw, ft2, ft4, ft8, lrpt, sstv, vdes, wefax, wspr.
# output_dir sets where sstv/wefax/lrpt write images (default: user cache dir).
[trx-server.decoders]
enabled = [
    "aprs",
    "aprs_hf",
    "ais",
    "cw",
    "ft2",
    "ft4",
    "ft8",
    "lrpt",
    "sstv",
    "vdes",
    "wefax",
    "wspr",
]

# SoapySDR pipeline; used when [rig.access] type = "sdr".
[trx-server.sdr]
sample_rate = 1920000
bandwidth = 1500000
wfm_deemphasis_us = 50
center_offset_hz = 100000
channels = []
max_virtual_channels = 4

# "auto" for hardware AGC, or "manual".
[trx-server.sdr.gain]
mode = "auto"
value = 30.0

# Software squelch on demodulated audio.
[trx-server.sdr.squelch]
enabled = false
threshold_db = -65.0
hysteresis_db = 3.0
tail_ms = 180

# Impulse-noise suppression on the IQ stream.
[trx-server.sdr.noise_blanker]
enabled = false
threshold = 10.0

# Timeout and buffer tuning.  The defaults suit most setups.
[trx-server.timeouts]
command_exec_timeout_ms = 10000
poll_refresh_timeout_ms = 8000
io_timeout_ms = 10000
request_timeout_ms = 12000
rig_task_channel_buffer = 32

# Client: exposes the radio to users.
[trx-client]

# Labels shown in the web UI.
[trx-client.general]
callsign = "N0CALL"
website_url = "https://haxx.space"
website_name = "haxx.space"
ais_vessel_url_base = "https://www.vesselfinder.com/?mmsi="
log_level = "info"

# Legacy single-remote form; prefer [[remotes]] below.
[trx-client.remote]
poll_interval_ms = 750

[trx-client.remote.auth]

[[trx-client.remotes]]
name = "home-hf"
url = "192.168.1.100:4530"
rig_id = "hf"
poll_interval_ms = 750

[trx-client.remotes.auth]
token = "my-token"

[[trx-client.remotes]]
name = "home-vhf"
url = "192.168.1.100:4530"
rig_id = "vhf"
poll_interval_ms = 750

[trx-client.remotes.auth]
token = "my-token"

# Web UI.  default_rig_name and the per-rig maps are keyed by the
# [[remotes]] name, not the server-side rig id.
[trx-client.frontends.http]
enabled = true
listen = "127.0.0.1"
port = 8080
default_rig_name = "home-hf"
initial_map_zoom = 10
spectrum_coverage_margin_hz = 50000
spectrum_usable_span_ratio = 0.9200000166893005
show_sdr_gain_control = true
bandplan_enabled = true
bandplan_region = "iaru_r1"
decode_history_retention_min = 1440

[trx-client.frontends.http.decode_history_retention_min_by_rig]

# Passphrase login for the web UI.  rx_passphrase_file and
# control_passphrase_file keep the secrets out of this file.
[trx-client.frontends.http.auth]
enabled = false
rx_passphrase = "rx-passphrase-example"
control_passphrase = "control-passphrase-example"
tx_access_control_enabled = true
session_ttl_min = 480
cookie_secure = false
cookie_same_site = "Lax"

# Hamlib-compatible TCP interface, one listener per rig.
[trx-client.frontends.rigctl]
enabled = false
listen = "127.0.0.1"
port = 4532

[trx-client.frontends.rigctl.rig_ports]

# JSON-over-TCP control interface.
[trx-client.frontends.http_json]
enabled = true
listen = "127.0.0.1"
port = 0

[trx-client.frontends.http_json.auth]
tokens = []

# Where to fetch the audio stream from.
[trx-client.frontends.audio]
enabled = true
server_port = 4531

[trx-client.frontends.audio.rig_urls]

[trx-client.frontends.audio.rig_ports]

# Play RX audio on a local sound device and capture TX from one.
[trx-client.frontends.audio.bridge]
enabled = false
bitrate_bps = 192000
rx_gain = 1.0
tx_gain = 1.0