Normalize tracked SPDX headers to the 2026 Stan Grams identity.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Clicking a source chip now isolates that source instead of toggling it.
Clicking the already-isolated source restores default visibility.
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Replace the fixed max-height: 360px on FT8/FT4/FT2/WSPR message
containers with flex-based layout so they grow to fill the available
space. Make #content, .tab-panel, and .sub-tab-panel flex containers
that propagate height down the layout chain.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Thread aprs_is_status through RigState, RigSnapshot, and the protocol
layer following the same pattern as pskreporter_status. Show the
connection target and callsign when enabled, or "Disabled" otherwise.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Preserve the WebGL drawing buffers used by the spectrum snapshot,
flush them before compositing, and move the shortcut listener to
capture phase so focused widgets do not swallow it.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
When a scheduler-managed decoder is manually disabled from the frontend,
take scheduler control first so the manual change overrides the current
scheduler cycle like a direct frequency change does.
Track decoder enabled state on the toggle buttons and only take over
when the click is actually disabling FT8, FT4, FT2, WSPR, or HF APRS.
Co-Authored-By: OpenAI Codex <noreply@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Allow the main frontend card to grow past the previous 1280px cap
on large screens while keeping side gutters for bookmark stacks.
Only widen the desktop layout at 1440px+ and cap it at 1600px so the
main content stays readable with room for side bookmarks.
Co-Authored-By: OpenAI Codex <noreply@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Primary bookmark was cramped at one grid column; Extra channels was
unnecessarily spanning the full row. Swap their grid-column spans so
the bookmark select gets full width and Extra channels sits in a
normal column alongside Label and Interleave.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Row gap 0.5→0.75rem and label-to-input gap 0.2→0.35rem, scoped
to #sch-entry-form so the bookmark form is unaffected.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Replace the inline always-visible add-row with a modal overlay
(same fixed + blurred-backdrop pattern as the bookmark add/edit
form). The "+ Add Entry" button opens the modal; each row now has
Edit and Remove buttons. Edit pre-fills the modal and updates the
entry in-place on save. CSS reuses the existing bookmark modal
selectors rather than duplicating rules.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add a new "Strongest decoded signal" section below the existing
"Longest decode paths" section on the map tab, showing the top 5
stations with the highest SNR across the current map history window.
Reuses existing map-qso-card styling with SNR displayed in place of
distance.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
- remote_client tests: add missing server_connected field and import
AtomicBool in the test module
- pskreporter: replace map_or(true, …) with is_none_or and
repeat(x).take(n) with repeat_n(x, n)
- dsp.rs, scheduler.rs: suppress intentional too_many_arguments with
#[allow(clippy::too_many_arguments)]
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add "AMC-QUAM" to the MODE_BW_DEFAULTS table in app.js with the same
bandwidth settings as AM (9 kHz default, 500 Hz min, 20 kHz max, 500 Hz
step). Add an <option value="AMC-QUAM"> to the bookmark datalist in
index.html.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
setRigFrequency applied applyLocalTunedFrequency before the network
round-trip, leaving the spectrum view shifted to the new frequency even
when the POST was rejected (e.g. 403 when the user loses control access).
Save the previous frequency and restore it in the catch block so the UI
stays aligned with the actual server-side state.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Show a full-screen blurred overlay (reusing decode-history-overlay styles)
when the SSE connection to trx-client drops or when trx-server is reported
unreachable via server_connected=false. The overlay distinguishes the two
failure modes with separate titles and sub-text. It is dismissed on
es.onopen (trx-client back) or when a message with server_connected!=false
arrives (trx-server back), and cleared on explicit disconnect/logout.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
decodeSource.onerror terminated the history worker but never called
flushLiveBuffer(), leaving historySettled=false and the "Loading decode
history…" overlay stuck on screen when trx-client breaks. Call
flushLiveBuffer() in the error path so the overlay is dismissed and the
powerHint connection-lost message is visible to the user.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
querySelectorAll("span") was picking up the inner .spectrum-bookmark-name
spans added in the previous commit, causing chips[i] to map to the wrong
element during left-position assignment. Switch to :scope > span to
select only direct-child chip spans.
Also revert axis bar from height:auto (which breaks the CSS transition and
collapses the bar) to height:38px with overflow:visible to accommodate
two-line labels while keeping the open/close animation intact.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Suppress stroke-dashoffset animation and drop-shadow filter on all
contact/radio paths when decodeContactPaths.size > 20 by toggling
.map-paths-static on #aprs-map, avoiding per-frame GPU compositing
with large decode histories.
Wrap non-sideStack bookmark chip labels in
<span class="spectrum-bookmark-name"> and allow word-break on axis
chips so long names split across two lines instead of being clipped.
Axis bar switches to min-height so it grows to fit taller chips.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
When the SSE stream drops (onerror or 15s heartbeat timeout) show
"trx-client connection lost, retrying…". When the stream is live but
server_connected is false, show "trx-server connection lost".
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add server_connected bool to FrontendMeta and inject it into every
/status and /events payload so the browser can distinguish between
trx-client and trx-server connection loss.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Track whether the remote client currently has an active TCP connection
to trx-server via a shared AtomicBool. Frontends can read this to
surface a distinct "trx-server connection lost" message.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Side-panel chips used white-space: normal + word-break: break-word,
causing names longer than ~16 characters to wrap onto a second line.
Switch to nowrap + overflow: hidden + text-overflow: ellipsis so long
names are clipped cleanly in a single line.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Drop FirTapsQuery, the set_fir_taps handler, and its service
registration. Tap count is no longer user-configurable.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add POST /set_sdr_lna_gain endpoint. Add an LNA Gain input+Set button
to the SDR settings row, styled identically to RF Gain. The control is
hidden until the server reports a sdr_lna_gain_db value (i.e. devices
that expose an LNA gain element). AGC disables it alongside RF Gain.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Replace vol-label with wfm-control on the Hardware AGC checkbox so its
label typography and alignment match the RF Gain control. Change the
outer container to align-items: flex-end so controls bottom-align.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
The bidirectional check required both A→B and B→A directed messages to
draw a contact line, which was too strict — the receiver may not hear
both sides of a QSO. Now a decode path is drawn whenever a directed
message is decoded and the target's locator is known from any message
in the 24 h history window.
Also rename "Longest QSOs" → "Longest decode paths" and update
related UI labels to better reflect what is actually shown.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
A QSO requires both parties to hear each other. Previously the map drew
contact paths whenever A sent a directed message to B and B's locator
was known from any message. Now paths only appear when both A→B and B→A
directed messages are present in the decoded history.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Add hardware AGC on/off control for SoapySDR backend, wired through the
full stack from RigCommand to the web UI:
- RigCommand::SetSdrAgc(bool) + ClientCommand::SetSdrAgc in protocol
- set_sdr_agc() on RigCat trait (not-supported default)
- SoapySdrRig: agc_enabled field, set_sdr_agc() via pipeline agc_cmd,
sdr_agc_enabled in filter_state(); removes the "not yet implemented"
warning — gain_mode="auto" now properly enables hardware AGC via
SoapySDR set_gain_mode()
- IqSource::set_gain_mode() trait method; RealIqSource implements it
- SdrPipeline: agc_cmd channel, read loop applies it each iteration
- POST /set_sdr_agc endpoint in trx-frontend-http
- New "SDR settings" full-row in index.html with Hardware AGC checkbox
and RF Gain (moved out of WFM controls); row hidden when
show_sdr_gain_control is false
- app.js: AGC checkbox handler, disables RF gain input while AGC is on,
syncs checkbox state from filter.sdr_agc_enabled
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Apply #ft8-messages container style (border, rounded corners, monospace
font, max-height with scroll) to #ft4-messages, #ft2-messages, and
#wspr-messages which were missing it.
Add #ft4-decode-toggle-btn and #ft2-decode-toggle-btn to the narrow-
screen white-space:nowrap media query rule alongside FT8/WSPR.
Cap DOM rows rendered per history view to 200 (FT8_MAX_DOM_ROWS,
FT4_MAX_DOM_ROWS, FT2_MAX_DOM_ROWS). Full history is retained in
memory; only the DOM representation is bounded. This prevents tab
switching from becoming sluggish after a long decode session where
thousands of rows accumulate in the DOM.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
The function handles FT8, FT4, and WSPR locators so the ft8 prefix
was misleading. Updated all call sites in app.js, ft8.js, ft4.js,
and wspr.js.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
- Add ft4 to DEFAULT_MAP_SOURCE_FILTER (visible by default)
- Add ft4 hue to locatorThemeHues (peakHue + 30° offset from FT8)
- Propagate ft4 through locatorSourceLabel, locatorFilterColor,
locatorHueForEntry, isLocatorOverlay, applyMapFilter,
ensureDecodeLocatorMarker, pruneLocatorEntry, rebuildDecodeContactPaths,
clearMapMarkersByType, markerSearchText, navigateToMapLocator, and
the source items chip row
- ft8MapAddLocator now maps type="ft4" to markerType="ft4" so FT4
locators get their own distinct marker colour and filter chip
- ft4.js: pass "ft4" (not "ft8") to ft8MapAddLocator
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
bmReadDecoders, bmWriteDecoders, and bmApply were all missing FT4,
so the decoder checkbox was never saved and tuning a bookmark never
toggled the FT4 decoder state.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Decouple the longest-QSO summary from the contact path render toggle.
Keep the summary filtered by current map visibility while the toggle only
controls whether path overlays are drawn.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
sjg
