- Call validate_sdr() at startup and abort on errors (SDR.md §11)
- Build SoapySdrRig with full [[sdr.channels]] config when access_type is
"sdr"; subscribe to its primary-channel PCM sender before handing the
pre-built rig to the rig task via RigTaskConfig.prebuilt_rig
- Skip cpal capture when an SDR audio source is available; bridge the
SdrPipeline PCM broadcast into pcm_tx so all decoder tasks are unchanged
- Add trx-backend-soapysdr optional dep and soapysdr feature to trx-server
- Add prebuilt_rig field to RigTaskConfig so rig_task skips the registry
factory when a pre-built rig is supplied by main
Marks SDR-08 complete.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Introduces the trx-backend-soapysdr crate with a compilable SoapySdrRig
struct that satisfies the Rig + RigCat trait bounds. RX methods
(get_status, set_freq, set_mode, get_signal_strength) are implemented;
TX-only methods return RigError::not_supported. as_audio_source returns
None for now (overridden in SDR-07). Wires the crate into the workspace
and trx-backend (feature "soapysdr"), and fixes the non-exhaustive match
on RigAccess::Sdr in trx-server main.rs and rig_task.rs.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Move DecoderLoggers and DecodeLogsConfig out of trx-server into a
dedicated src/decoders/trx-decode-log crate, giving file logging the
same standalone crate treatment as the four decoder crates.
- src/decoders/trx-decode-log/ (new — DecodeLogsConfig + DecoderLoggers)
- trx-server/config.rs: re-exports DecodeLogsConfig from trx-decode-log
so ServerConfig field references and all tests compile unchanged
- trx-server: drop decode_logs module, use trx_decode_log directly
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Move the Goertzel-based CW decoder out of trx-server::decode::cw into
a dedicated src/decoders/trx-cw crate, matching the layout of trx-aprs,
trx-ft8, and trx-wspr. The decode module is now empty and removed.
- src/decoders/trx-cw/ (new — Goertzel + Morse decoder)
- trx-server: drop decode module entirely, use trx_cw::CwDecoder
- CwEvent stays in trx-core (mirrors AprsPacket / Ft8Message / WsprMessage)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Move trx-ft8 and trx-wspr into src/decoders/ alongside a new trx-aprs
crate that extracts the Bell 202/AX.25 decoder from trx-server, giving
all three modems a consistent crate-per-decoder layout.
- src/decoders/trx-ft8/ (moved from src/trx-ft8/)
- src/decoders/trx-wspr/ (moved from src/trx-wspr/)
- src/decoders/trx-aprs/ (new — Bell 202 AFSK + AX.25/APRS decoder)
- trx-ft8/build.rs: fix external/ft8_lib relative path after move
- trx-server: drop decode::aprs module, use trx_aprs::AprsDecoder
- AprsPacket stays in trx-core (mirrors Ft8Message / WsprMessage)
- Workspace Cargo.toml updated with new member paths
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add optional passphrase-based authentication with two roles (rx/control),
session management, auth middleware, and protected routes.
Phase 1: Config model with HttpAuthConfig struct, CookieSameSite enum,
validation logic for enabled auth requiring at least one passphrase.
Phase 2: Auth module with:
- AuthRole enum (Rx, Control)
- SessionRecord and SessionStore for in-memory session management
- AuthConfig at runtime
- /auth/login, /auth/logout, /auth/session endpoints
- Constant-time passphrase comparison for timing attack mitigation
Phase 3: Integration with:
- AuthMiddleware for route protection with public/read/control classification
- Server-side AuthState setup with cleanup task for expired sessions
- Auth endpoints registered in api.rs configure()
Sessions use 128-bit random IDs (hex-encoded), HttpOnly cookies, configurable
SameSite attribute. Auth is disabled by default to preserve current behavior.
All unit and integration tests passing.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add a new trx-wspr crate that wraps wsprd slot decoding and parsed
results, wire it into the server audio pipeline, and emit WSPR decode
events to clients.
Also add frontend event routing for WSPR decode messages and temporary
rendering in the FT8 table until a dedicated WSPR panel is introduced.
Co-authored-by: Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Update workspace Cargo.toml to include new trx-protocol crate
and update Cargo.lock with new dependencies.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Remove macOS AppKit frontend (trx-frontend-appkit) and related code:
- Delete appkit crate directory
- Remove appkit dependency and feature from Cargo.toml
- Remove appkit imports, main thread handling, and config from main.rs
- Remove AppKit config struct from config.rs
- Remove appkit section from example config
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add AudioConfig to server configuration with support for RX capture
and TX playback via cpal and Opus encoding. Run a dedicated TCP
listener (default port 4533) that sends StreamInfo on connect, streams
RX Opus frames to clients, and receives TX frames back.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add a JSON-over-TCP listener so trx-client can connect to trx-server.
Speaks the ClientEnvelope/ClientResponse protocol from trx-core::client.
- New listener.rs module with per-client connection handling
- ListenConfig/AuthConfig in config.rs (default: 127.0.0.1:4532)
- CLI args --listen and --port for override
- Optional token-based authentication
- Updated example config with [listen] section
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add a new trx-frontend-appkit crate using objc2 + AppKit as a
replacement for the removed Qt/QML frontend. The frontend provides
the same feature set: frequency/mode/band display, PTT/power/VFO/lock
controls, signal/TX metering, and frequency/mode/TX-limit input.
Architecture splits platform-agnostic model (model.rs) from AppKit
UI (ui.rs) to facilitate future UIKit porting. State flows from the
async tokio watcher via std::sync::mpsc to the AppKit main thread;
button actions flow back through a channel to stay on the UI thread.
Feature-gated behind `appkit-frontend` cargo feature.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Remove the Linux-only Qt/QML frontend (trx-frontend-qt) crate and all
references to it from the workspace, trx-client binary, configuration,
and documentation. This prepares for replacement with a native macOS
AppKit frontend.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Delete trx-bin (all-in-one) and trx-bin-common (shared lib). Each binary
now has its own config, plugins, and helper modules inlined.
- trx-server: backend-only daemon with ServerConfig (general, rig, behavior)
no frontend dependencies
- trx-client: remote client with ClientConfig (general, remote, frontends)
includes all frontend support (http, rigctl, http-json, qt)
- Dedicated config files: trx-server.toml / trx-client.toml
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
sjg