Replace the BW slider + FIR taps filter panel with a visual bandwidth
bookmark drawn directly on the spectrum canvas:
- Semi-transparent amber gradient strip spanning dialFreq ± BW/2
- Rounded-top bookmark tab at the top of the strip showing the current BW
- Draggable left/right edge handles (cursor: ew-resize) that adjust bandwidth
live and send set_bandwidth on mouse-up; range clamped per-mode defaults
- Y-axis now labeled with dB values (floor to ceiling) drawn on canvas
- Configurable floor level via number input below spectrum (default -100 dB)
- Auto button fits floor/range to current noise floor and peak level
- Remove FIR taps selector (internal DSP implementation detail)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Spectrum panel is now placed above the freq/mode/jog row, spanning the
full card width. Key improvements:
- Scroll wheel zooms in/out at the cursor position (up to 64x); double-
click resets to full bandwidth view.
- Mouse drag pans the visible window; click-to-tune is suppressed when a
drag has occurred.
- Touch pinch-to-zoom and single-finger drag-to-pan supported.
- Hover tooltip shows the frequency under the cursor, formatted to the
currently selected unit (MHz/kHz/Hz, matching the jog-step selection).
- Frequency axis labels update to reflect the zoomed visible range.
- Canvas height increased to 160 px; axis bar styled with card bg.
- A small hint line below the panel explains the controls.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Poll GetSpectrum every 200 ms in remote_client via a dedicated timer that
bypasses the main state-watch channel (no SSE noise). The resulting
SpectrumData is stored in FrontendRuntimeContext::spectrum and served by
a new GET /spectrum endpoint (JSON or 204 when unavailable).
HTTP frontend shows a spectrum panel (canvas + frequency axis) only when
the rig reports filter_controls=true (i.e. SoapySDR). The canvas renders:
- dark background with dBFS grid lines
- green FFT spectrum line with semi-transparent fill
- red dashed vertical marker at the currently tuned frequency
- frequency axis labels (MHz/kHz) below the canvas
Clicking the canvas tunes the rig to the clicked frequency.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Fix authenticated refresh by restoring tab visibility during startup, and retune dark mode toward deep blue with amber-red accents.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Replace separate theme and auth buttons with a visually connected
button group. Buttons are grouped with no gap between them and
rounded corners only on the outer edges, creating a cohesive control.
Features:
- First button: rounded left edges
- Last button: rounded right edges
- Middle buttons: sharp edges (if more added)
- Negative margin to overlap borders smoothly
- Hover effect for feedback
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Refine map plotting and filter UX in HTTP frontend plugins.\n\n- support plotting multiple locator squares from FT8/WSPR messages\n- show locator lists in popup content as newline-separated entries\n- add WSPR map layer filter toggle and marker typing\n- style filter controls for strong dark/light mode contrast\n- keep themed behavior aligned with map and control updates\n\nCo-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add dark/light mode selector below logo and wire theme-aware visuals.\n\n- add compact theme toggle control under header logo\n- support persistent dark/light theme switching\n- use emoji labels for theme toggle actions\n- make jog and audio level visuals theme-aware\n- add dark-mode map tile layer and live layer switching on theme changes\n- keep responsive behavior for header graph and controls\n\nCo-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Implement UI refinements for the HTTP frontend main and plugin views.\n\n- add dimmed header signal graph with live rendering and scale\n- make graph responsive, colorized by signal strength, and keep last 10s only\n- add APRS and WSPR text filtering, matching FT8 behavior\n- refine responsive layout for controls/map/header behavior\n- tune jog wheel/button sizing and mode selector height alignment\n\nCo-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Adjust responsive behavior and interaction details in the HTTP frontend.\n\n- switch signal measurement from sample-based to time-based averaging\n- move Transmit/Power below Mode+Tune on small viewports\n- add practical mobile breakpoints and width handling\n- resize and tune logo/top spacing/layout placement\n- make map height viewport-aware with adjustable minimum\n- improve FT8/WSPR control wrapping on small screens\n\nCo-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Refine main control interactions and presentation in the HTTP frontend.\n\n- remove frequency and mode Set buttons\n- apply mode changes immediately on picker change\n- place Mode/Tune/Transmit-Power controls in one horizontal row\n- align control labels vertically across that row\n- move and enlarge MHz/kHz/Hz selector beside frequency input\n- keep Enter-to-set frequency behavior\n- switch signal measurement to elapsed-time averaging\n- enlarge header logo 2x\n\nCo-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add rigctl frontend visibility in HTTP status/about UI and refine frequency controls layout.\n\n- track rigctl listen endpoint and active rigctl client count in frontend runtime context\n- inject rigctl metadata into HTTP /events payload\n- show rigctl endpoint and rigctl client count in About tab\n- remove frequency Set button from UI\n- move MHz/kHz/Hz selector beside frequency input and enlarge it\n- center jog wheel row and keep Enter-to-set frequency behavior\n\nCo-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add a Map sub-tab under Plugins that displays an interactive
OpenStreetMap via Leaflet.js showing:
- Receiver location (blue marker) from server config lat/lon
- APRS station positions (green markers) updated in real-time
The map lazy-initializes on first tab switch, handles tile rendering
on tab visibility changes, and deduplicates station markers by
callsign. Also includes the fallback snapshot lat/lon fields in the
API layer.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
- Add APRS symbol icons using hessu/aprs-symbols sprite sheets
- Parse uncompressed and compressed position formats for lat/lon
- Render clickable OpenStreetMap links for position packets
- Replace delay-and-multiply discriminator with mark/space correlation
detector for more robust AFSK decoding
- Reduce PLL gain from 0.7 to 0.4 for stable clock recovery
- Move plugin JS files to plugins/ subdirectory
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add Auto checkboxes (checked by default) next to WPM and Tone inputs.
Auto Tone uses a multi-bin Goertzel scan across 300-1200 Hz with
stability tracking. Auto WPM collects on-durations in a rolling buffer
and uses k-means-style clustering to separate dits from dahs.
Unchecking Auto allows manual control.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Extract the APRS decoder from app.js into its own aprs.js file and add
a new CW (Morse code) decoder plugin in cw.js. The CW decoder uses a
Goertzel tone detector with configurable WPM, tone frequency, and
signal threshold. The Plugins tab now has three sub-tabs: Overview,
APRS, and CW.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Assign green to VFO A, yellow to VFO B, and deterministic hues
to additional VFOs. The active VFO color is also applied to the
main frequency display. Rework the header title to show
"trx-rs <version> @ <callsign>'s <rig>" instead of "<rig> status".
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Fix three bugs in the Bell 202 AFSK demodulator preventing frame
decoding:
- Separate NRZI state from clock recovery (shared lastBit variable
caused NRZI to always output 1)
- Buffer 1-bits in ones counter instead of pushing to frameBits
immediately, preventing flag/stuff bits from contaminating frame
data and corrupting byte alignment
- Detect flags via ones-count on decoded bits instead of shift
register on raw bits
Also add framed packet log container styling, remove redundant
description text, and add debug counters logging pipeline health
to the browser console.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Replace server-side /frontends endpoint with client-side plugin system.
The Plugins tab now has Overview and APRS sub-tabs. The APRS plugin
decodes packets from RX audio using Bell 202 AFSK demodulation (1200
baud), AX.25 frame decoding with NRZI/HDLC, and CRC-16-CCITT
validation. Decoded packets are displayed in a scrolling log.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add GET /frontends API endpoint returning registered frontend names as
JSON. Add Plugins tab to the web UI that fetches and displays the list.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
sjg
