- trx-server/rig_handle: remove dead vchan_manager field (was set but
never read after the virtual-channel refactor)
- trx-server/listener: remove now-missing vchan_manager initializer
- trx-server/main: remove vchan_manager_for_handle intermediates that
only fed the dropped field
- trx-server/audio: suppress too_many_arguments on run_audio_listener
- trx-frontend-http/server: suppress too_many_arguments on build_server
- trx-core/vchan: update module doc comment to not reference the
removed RigHandle::vchan_manager field
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
MARINE was a composite mode that ran both AIS and VDES decoders
simultaneously. It is now fully replaced by allocating two virtual
channels — one tuned to the AIS frequencies and one to VDES — each
decoded independently.
- trx-core/state: remove RigMode::MARINE variant
- trx-protocol/codec: remove MARINE parse/serialize
- trx-backend-ft817: remove MARINE from unsupported-mode guard
- trx-backend-ft450d: remove MARINE from FM CAT code mapping
- trx-backend-soapysdr: remove MARINE from bandwidth table, supported
modes list, AIS channel activity check, parse_rig_mode, vchan_impl
bandwidth table, demod selection, dsp/channel bandwidth / sample-rate
/ IQ-tap guards
- trx-server/audio: remove MARINE from AIS and VDES decoder activation
- trx-server/rig_task: remove MARINE from audio-streaming mode list
- trx-server/main: remove MARINE from bandwidth table, mode parser,
VDES channel subscription match
- app.js: remove isMarineMode(), MARINE entry in MODE_BW_SPECS, MARINE
bandwidth specs block in visibleBandwidthSpecs(), MARINE from
decoder status mode lists, MARINE BW-edge drag guard
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Allow users to allocate multiple virtual channels independently of
browser tab count. Channels survive SDR center-frequency retuning as
long as they stay within the capture bandwidth; channels that fall
outside the SDR span are automatically destroyed.
Changes:
- trx-core: add AUDIO_MSG_VCHAN_DESTROYED (0x12) wire constant;
add default subscribe_destroyed() to VirtualChannelManager trait
- trx-backend-soapysdr: update_center_hz() detects OOB channels,
removes them, fires destroyed_tx broadcast; add destroyed_sender()
and subscribe_destroyed() override
- trx-server/audio: recv_destroyed() helper avoids select! busy-loop
for non-SDR backends; send AUDIO_MSG_VCHAN_DESTROYED to client when
a channel is evicted server-side
- trx-client/audio_client: persist active_subs across TCP reconnects,
re-subscribe on reconnect; handle AUDIO_MSG_VCHAN_DESTROYED by
pruning vchan_audio map and forwarding UUID via vchan_destroyed_tx
- trx-frontend/lib: add vchan_destroyed broadcast field to
FrontendRuntimeContext
- trx-client/main: wire vchan_destroyed_tx into audio client and
frontend runtime context
- trx-frontend-http/vchan: remove per-session one-channel limit in
allocate(); replace auto-evict in release_session_on_rig() with
subscriber-count-only update; add remove_by_uuid() for server-
triggered OOB destruction (skips redundant VChanAudioCmd::Remove)
- trx-frontend-http/server: spawn background task that forwards
vchan_destroyed broadcast to ClientChannelManager.remove_by_uuid()
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
- VirtualSquelchConfig is only used in tests; gate import with #[cfg(test)]
- fixed_slot_count is reserved for future use; mark #[allow(dead_code)]
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Add VirtualChannelManager trait in trx-core::vchan with types VChannelInfo,
VChanError, and SharedVChanManager alias. Re-export from trx-backend::vchan.
Implement SdrVirtualChannelManager in trx-backend-soapysdr:
- Wraps Arc<SdrPipeline> + shared AtomicI64 center_hz
- add_channel / remove_channel / set_channel_freq / set_channel_mode
- Slot-stability: on remove, shifts pipeline_slot for surviving channels
- update_center_hz: recomputes IF offsets for all virtual channels on retune
- update_primary_meta: keeps channel-0 freq/mode in sync for API consumers
Wire into SoapySdrRig (holds Arc<SdrVirtualChannelManager>, exposes
channel_manager()), SdrPipeline (shared_center_hz AtomicI64), and RigHandle
(vchan_manager: Option<SharedVChanManager>). main.rs extracts the manager
before boxing the SDR rig and stores it in the handle.
Add max_virtual_channels to SdrConfig (default 4, TOML-configurable).
Add 5 unit tests: add, remove, permanent guard, cap, out-of-bandwidth.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Replace the fixed channel_dsps Vec (thread-owned) with an
Arc<RwLock<Vec<...>>> shared between the IQ read thread and the async
side, enabling live add/remove of virtual DSP channels.
Cache audio construction params in SdrPipeline so add_virtual_channel()
can build ChannelDsp instances without being re-passed them. Add:
- SdrPipeline::add_virtual_channel() / remove_virtual_channel()
- SoapySdrRig::virtual_channel_add/remove/set_freq/set_mode()
- SoapySdrRig::center_hz() / half_span_hz() accessors
The IQ read loop holds a brief read lock (~2 ms per block) while
processing all channels; write lock for add/remove waits at most one
block. All 27 existing tests continue to pass.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Add flate2 dependency and a new AUDIO_MSG_HISTORY_COMPRESSED (0x0a)
wire type. The server gzip-compresses the full history blob before
sending; JSON history compresses ~10-20x so both transfer size and
client wait time drop significantly. The client decompresses and
dispatches sub-messages from the embedded framed stream. MAX_PAYLOAD_SIZE
is kept at 1 MB for normal messages; a separate 16 MB limit is applied
only to the compressed history type.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Assigns message type 0x09 to HF APRS decoded frames on the binary
audio TCP channel and wires it up in all three layers:
- trx-core: AUDIO_MSG_HF_APRS_DECODE = 0x09
- trx-server: emit 0x09 in the live dispatch match and include
hf_aprs history in the connection-open replay blob
- trx-client: recognise 0x09 and forward to the decode broadcast
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Adds a second APRS demodulator path tuned for the HF APRS standard
(300 baud Bell 103-style AFSK, mark=1600 Hz / space=1800 Hz), active
on RigMode::DIG. Shares AX.25 framing, APRS parsing, APRS-IS uplink,
and frontend display with the existing VHF stack.
- trx-aprs: parameterise Demodulator::new(); add AprsDecoder::new_hf()
- trx-core: HfAprs variant in DecodedMessage; hf_aprs_decode_enabled /
hf_aprs_decode_reset_seq in RigState/RigSnapshot; SetHfAprsDecodeEnabled
and ResetHfAprsDecoder commands; handlers.rs fallback arm updated
- trx-protocol: client command variants + bidirectional mapping; test
fixture updated
- trx-server: run_hf_aprs_decoder() task (activates on DIG mode);
hf_aprs history in DecoderHistories; rig_task command dispatch;
aprsfi uplink forwards HfAprs via OR-pattern
- trx-frontend: hf_aprs_history in FrontendRuntimeContext
- trx-frontend-http: prune/record/snapshot/clear helpers; SSE history
replay; toggle_hf_aprs_decode + clear_hf_aprs_decode endpoints;
/hf-aprs.js endpoint; HF APRS tab in web UI
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Replace per-message write + flush-every-64 with a single in-memory blob
that is sent via one write_all + one flush. Add estimated_total_count()
to DecoderHistories for pre-allocation. Eliminates N/64 partial flushes
and repeated small writes that dominated replay latency for large APRS
histories.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
ResetCwDecoder already bumped cw_decode_reset_seq but omitted the
history flush that APRS, FT8, and WSPR all perform. Wire
clear_cw_history() into the handler to match the pattern.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
No reset event for CW is wired in rig_task.rs, so the method was
dead code and triggered a compiler warning.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Subscribe to the first sdr.channels[] entry configured as VDES or
MARINE instead of always using channel 0. The ChannelDsp IQ tap only
emits samples when its own mode is VDES/MARINE, so the two must agree.
Fix vdes_sr to mirror channel.rs pipeline_rates(): use
audio_sample_rate.max(96_000) as the target rather than the hardcoded
96_000. The two diverge when audio_sample_rate > 96_000, causing the
VdesDecoder to use the wrong symbol-to-sample ratio.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Move persistent history from trx-client to trx-server where decode
events originate. History for AIS, VDES, APRS, CW, FT8, and WSPR is
loaded from ~/.local/cache/trx-rs/history.db at startup and flushed
to disk every 60 seconds. CW events are now also stored in
DecoderHistories and replayed to connecting clients, consistent with
all other decoder types.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Two problems prevented reliable recovery after a persistent overflow:
1. Restart storm: once read_error_streak >= 3, every subsequent read
failure triggered a deactivate/activate cycle, potentially preventing
the hardware from stabilising. Fix: after a successful restart, reset
read_error_streak to 1 so the stream gets 2 more failures before the
next restart attempt.
2. Stuck-deactivated stream: if activate() failed after overflow, the
stream was left deactivated. Subsequent reads returned non-overflow
errors which handle_read_error ignored (Ok(false)), so the stream was
never reactivated. Fix: add a high-streak fallback (>= 10 consecutive
errors of any kind) that also attempts a full deactivate/activate
restart, covering the stuck-deactivated case.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Two bugs triggered by a SoapySDR IQ overflow:
1. Spectrum dies permanently (trx-client): when GetSpectrum times out
(300ms SPECTRUM_IO_TIMEOUT), the error was silently swallowed and
the spectrum buffer cleared. The in-flight response remained in the
TCP receive buffer, desynchronising all subsequent reads so every
poll kept failing. Fix: propagate the error so handle_connection
returns and the outer loop reconnects, restoring TCP sync.
2. CTRL+C hangs trx-server: after IQ overflow, the sdr-iq-read thread
can get stuck in a blocking SoapySDR/USB call (deactivate/activate
with no timeout). Tokio received SIGINT and aborted async tasks, but
the process could not exit while the native thread was blocked in
uninterruptible I/O. Fix: call std::process::exit(0) after the
graceful shutdown sequence so the OS forcibly terminates all threads.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Add per-channel processing gating and disable hidden AIS channel DSP unless mode is AIS or MARINE, reducing continuous IQ read-loop CPU load in normal operation.\n\nCo-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Skip IQ fanout buffer cloning when no subscribers exist and apply backoff on repeated zero-length reads to avoid hot-loop CPU spikes.\n\nCo-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Enforce CW decode processing only when mode is CW/CWR and decoder
is enabled, even within the receive loop, and remove CW path RMS
zero-gating to preserve weak tone decoding.
Co-authored-by: Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Expand server-side CW tone command clamping to 100-10000 Hz to match
frontend controls and picker behavior.
Co-authored-by: Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Apply an RMS gate to near-silent decoder input frames and zero them
before APRS/CW/FT8/WSPR processing to avoid false decodes from
unsquelched/no-signal noise.
Co-authored-by: Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Gate the CW decoder task on cw_decode_enabled in both startup and state changes.
This restores the UI toggle and prevents decode activity when CW decode is off.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Make FT-817 mode setting fail for unsupported modes instead of silently mapping SDR-only modes onto FM.
Co-authored-by: Stan Grams <sjg@haxx.space>
Signed-off-by: Stan Grams <sjg@haxx.space>
Remove SDR-only decoder modes from the FT-817 supported mode list so they are not shown in that rig's mode picker.
Co-authored-by: Stan Grams <sjg@haxx.space>
Signed-off-by: Stan Grams <sjg@haxx.space>
Raise the AM audio AGC target and headroom again so the restored envelope demod path plays at a stronger level.
Co-authored-by: Stan Grams <sjg@haxx.space>
Signed-off-by: Stan Grams <sjg@haxx.space>
Retune the AM audio AGC target, timing, and headroom so the restored envelope demod path plays back at a stronger level.
Co-authored-by: Stan Grams <sjg@haxx.space>
Signed-off-by: Stan Grams <sjg@haxx.space>
Revert the recent AM coherent detector experiment and restore the original envelope detector path.
Co-authored-by: Stan Grams <sjg@haxx.space>
Signed-off-by: Stan Grams <sjg@haxx.space>
Remove half-wave clipping from the AM coherent detector output and slow the carrier-reference tracking to reduce audible distortion.
Co-authored-by: Stan Grams <sjg@haxx.space>
Signed-off-by: Stan Grams <sjg@haxx.space>
Replace the raw AM envelope detector with a limiter-derived coherent detector and update backend tests for the current channel DSP constructor.
Co-authored-by: Stan Grams <sjg@haxx.space>
Signed-off-by: Stan Grams <sjg@haxx.space>
Finish the pending MARINE frontend and decoder activation wiring, and lower the VDES detector power floors so weak signals are eligible for burst detection in the same power domain used by the IQ path.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Keep the SoapySDR VDES and MARINE IQ path at a much higher channel sample rate instead of collapsing toward the normal audio rate, so the decoder receives usable complex baseband for the 76.8 ksps VDES signal.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add an FT8 live overlay bar, align APRS top controls with the other decoder tabs, advertise MARINE in the SoapySDR mode list, and make the VDES decoder emit raw unsynced diagnostic frames instead of dropping weak bursts outright.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Keep weak VDES bursts visible by emitting unsynced diagnostic frames instead of dropping them, remove receiver badges from FT8 and WSPR history rows, and carry the current MARINE composite-mode scaffolding through the shared mode enums and backend mappings.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Improve the VDES decoder with sync/rotation metadata and a first hard-decision rate-1/2 Viterbi stage after deinterleaving, then surface the extra lock state in the VDES frontend. Also fix the strict clippy findings in AIS, frontend bookmarks, and the server audio stack signature.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
sjg
