Restructure trx-wxsat into noaa/ (APT) and lrpt/ (Meteor-M LRPT) submodules
with shared crate base. Add QPSK demodulator, CCSDS CADU framer, MCU channel
assembler for LRPT. Wire LRPT through full stack (core types, protocol, server
decoder task, client). Add Weather Satellites sub-tab in Digital Modes with
toggle buttons for NOAA APT and Meteor LRPT, descriptions, and image history.
https://claude.ai/code/session_01JA13DHuzuHUL4nSBBRU83f
Signed-off-by: Claude <noreply@anthropic.com>
Rename the crate from trx-noaa to trx-wxsat (weather satellite) across
the entire workspace. Add full NOAA satellite decode support:
- Telemetry frame parsing: extract 16-wedge calibration data from the
128-line telemetry frames embedded in APT lines
- Radiometric calibration: piecewise-linear LUT built from wedges 1-8
to correct pixel values against known reference levels
- Channel identification: detect AVHRR sensor channels (VIS, NIR, MIR,
TIR) from wedge 9 values per APT sub-channel
- Satellite identification: heuristic NOAA-15/18/19 detection from
channel A/B sensor pairings
- Histogram equalisation: per-channel contrast enhancement for improved
image output
- WxsatImage now carries satellite name and channel labels in decoded
message broadcasts
https://claude.ai/code/session_01JA13DHuzuHUL4nSBBRU83f
Signed-off-by: Claude <noreply@anthropic.com>
Estimate Co-Channel Interference (CCI) from pilot tone quadrature
leakage and coherence degradation. Estimate Adjacent Channel
Interference (ACI) from CMA equalizer tap deviation from identity.
Both metrics (0-100 scale) are surfaced through RigFilterState and
displayed as colour-coded bars in the WFM control panel.
The RDS decoder quality parameter is now adaptively penalised when
CCI/ACI levels are elevated, reducing block-error rate under
interference conditions.
https://claude.ai/code/session_016EKzep42RCvE4GxvvRaCwu
Signed-off-by: Claude <noreply@anthropic.com>
IQ-domain impulse noise blanker using exponential-smoothing RMS tracker. Samples exceeding threshold × running RMS are replaced with the last clean sample. Configurable via [sdr.noise_blanker] in TOML config and runtime via POST /set_sdr_noise_blanker API.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Normalize tracked SPDX headers to the 2026 Stan Grams identity.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Thread aprs_is_status through RigState, RigSnapshot, and the protocol
layer following the same pattern as pskreporter_status. Show the
connection target and callsign when enabled, or "Disabled" otherwise.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add parse_mode and mode_to_string support for RigMode::AMC, accepting
"AMC-QUAM", "AMC_QUAM", and "AMC" as input strings and serializing to
"AMC-QUAM". Add test cases for round-trip correctness.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Drop SetFirTaps ClientCommand variant and its mapping to/from
RigCommand. Remove fir_taps from RigFilterState codec tests.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Map ClientCommand::SetSdrLnaGain { gain_db } to and from
RigCommand::SetSdrLnaGain in both directions.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add hardware AGC on/off control for SoapySDR backend, wired through the
full stack from RigCommand to the web UI:
- RigCommand::SetSdrAgc(bool) + ClientCommand::SetSdrAgc in protocol
- set_sdr_agc() on RigCat trait (not-supported default)
- SoapySdrRig: agc_enabled field, set_sdr_agc() via pipeline agc_cmd,
sdr_agc_enabled in filter_state(); removes the "not yet implemented"
warning — gain_mode="auto" now properly enables hardware AGC via
SoapySDR set_gain_mode()
- IqSource::set_gain_mode() trait method; RealIqSource implements it
- SdrPipeline: agc_cmd channel, read loop applies it each iteration
- POST /set_sdr_agc endpoint in trx-frontend-http
- New "SDR settings" full-row in index.html with Hardware AGC checkbox
and RF Gain (moved out of WFM controls); row hidden when
show_sdr_gain_control is false
- app.js: AGC checkbox handler, disables RF gain input while AGC is on,
syncs checkbox state from filter.sdr_agc_enabled
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Add [workspace.package] version = "0.1.0" to the root Cargo.toml and
switch all 21 member crates to version.workspace = true so the entire
workspace is versioned from a single place.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
MARINE was a composite mode that ran both AIS and VDES decoders
simultaneously. It is now fully replaced by allocating two virtual
channels — one tuned to the AIS frequencies and one to VDES — each
decoded independently.
- trx-core/state: remove RigMode::MARINE variant
- trx-protocol/codec: remove MARINE parse/serialize
- trx-backend-ft817: remove MARINE from unsupported-mode guard
- trx-backend-ft450d: remove MARINE from FM CAT code mapping
- trx-backend-soapysdr: remove MARINE from bandwidth table, supported
modes list, AIS channel activity check, parse_rig_mode, vchan_impl
bandwidth table, demod selection, dsp/channel bandwidth / sample-rate
/ IQ-tap guards
- trx-server/audio: remove MARINE from AIS and VDES decoder activation
- trx-server/rig_task: remove MARINE from audio-streaming mode list
- trx-server/main: remove MARINE from bandwidth table, mode parser,
VDES channel subscription match
- app.js: remove isMarineMode(), MARINE entry in MODE_BW_SPECS, MARINE
bandwidth specs block in visibleBandwidthSpecs(), MARINE from
decoder status mode lists, MARINE BW-edge drag guard
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Adds a second APRS demodulator path tuned for the HF APRS standard
(300 baud Bell 103-style AFSK, mark=1600 Hz / space=1800 Hz), active
on RigMode::DIG. Shares AX.25 framing, APRS parsing, APRS-IS uplink,
and frontend display with the existing VHF stack.
- trx-aprs: parameterise Demodulator::new(); add AprsDecoder::new_hf()
- trx-core: HfAprs variant in DecodedMessage; hf_aprs_decode_enabled /
hf_aprs_decode_reset_seq in RigState/RigSnapshot; SetHfAprsDecodeEnabled
and ResetHfAprsDecoder commands; handlers.rs fallback arm updated
- trx-protocol: client command variants + bidirectional mapping; test
fixture updated
- trx-server: run_hf_aprs_decoder() task (activates on DIG mode);
hf_aprs history in DecoderHistories; rig_task command dispatch;
aprsfi uplink forwards HfAprs via OR-pattern
- trx-frontend: hf_aprs_history in FrontendRuntimeContext
- trx-frontend-http: prune/record/snapshot/clear helpers; SSE history
replay; toggle_hf_aprs_decode + clear_hf_aprs_decode endpoints;
/hf-aprs.js endpoint; HF APRS tab in web UI
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Keep weak VDES bursts visible by emitting unsynced diagnostic frames instead of dropping them, remove receiver badges from FT8 and WSPR history rows, and carry the current MARINE composite-mode scaffolding through the shared mode enums and backend mappings.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add a new trx-vdes decoder path alongside AIS, wire VDES through the server/frontend decode pipeline, and fix the web map so AIS vessel symbols load correctly and the TRX receiver marker appears when location data arrives.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Add dual-channel AIS decode support across the SoapySDR backend, server decode pipeline, and frontend plugins, including the new AIS tab, live bar, and map filtering.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Wire the StereoDenoise processor through the full stack:
- Add SetWfmDenoise command variant and RigCat trait method (trx-core)
- Add wfm_denoise field to RigFilterState with default true
- Add protocol command and bidirectional mapping (trx-protocol)
- Add rig_task command handler (trx-server)
- Implement set_wfm_denoise in SoapySdrRig backend
- Add /set_wfm_denoise API endpoint (trx-frontend-http)
- Add denoise checkbox in WFM controls with SSE sync and
localStorage persistence
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Add a server-side toggle for the multiband stereo denoiser so it can be
enabled or disabled at runtime without restarting the server.
Backend (trx-backend-soapysdr):
- Add `denoise_enabled: bool` to `WfmStereoDecoder`; gate multiband
blend behind it (falls back to uniform single-band blend when off)
- Add `set_denoise_enabled()` method on `WfmStereoDecoder`
- Propagate `wfm_denoise: bool` through `ChannelDsp`, `SdrPipeline`,
and `SoapySdrRig`; add `set_wfm_denoise()` at each layer
- Include `wfm_denoise` in `filter_state()` so it flows into snapshots
Protocol / core (trx-core, trx-protocol, trx-server):
- Add `SetWfmDenoise(bool)` to `RigCommand` and `ClientCommand`
- Add default `set_wfm_denoise()` trait method to `RigCat`
- Handle `SetWfmDenoise` in `rig_task.rs` and update `RigFilterState`
- Add `wfm_denoise: bool` (default `true`) to `RigFilterState`
Frontend (trx-frontend-http):
- Add `POST /toggle_wfm_denoise` endpoint
- Add "Denoise On/Off" button next to the stereo/mono audio picker
- Sync button state from SSE filter snapshot (`update.filter.wfm_denoise`)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Add SpectrumData struct (bins, center_hz, sample_rate) to RigState and
RigSnapshot. Add GetSpectrum RigCommand and ClientCommand plumbed through
the protocol layer. SoapySDR DSP pipeline now computes a 1024-bin FFT
(Hann window, FFT-shifted, dBFS) every 4 IQ blocks (~10 Hz update rate)
and exposes it via RigCat::get_spectrum(). The rig_task handles
GetSpectrum without persisting spectrum data in ongoing state.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Include optional display_name field in GetRigs response to allow clients
to show friendly rig names instead of just identifiers.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Improve assertion and struct literal formatting across test cases
for better code clarity and consistency.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add SetBandwidth { bandwidth_hz: u32 } and SetFirTaps { taps: u32 } to
ClientCommand with bidirectional mapping to RigCommand variants.
Add UC-09 protocol serialization tests confirming that RigSnapshot
serializes the filter field when Some and omits it when None.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Add GetRigs command, rig_id routing fields, and RigEntry type:
- ClientCommand::GetRigs (intercepted in listener before rig_task)
- rig_id: Option<String> on ClientEnvelope (absent = first rig)
- rig_id: Option<String> and rigs: Option<Vec<RigEntry>> on ClientResponse
- RigEntry { rig_id, state } for GetRigs aggregated response
- Sentinel unreachable!() arm for GetRigs in client_command_to_rig()
- MR-09 codec tests: rig_id parsing, GetRigs round-trip, serde omit-when-None
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Claude
sjg
