Rename the crate from trx-noaa to trx-wxsat (weather satellite) across
the entire workspace. Add full NOAA satellite decode support:
- Telemetry frame parsing: extract 16-wedge calibration data from the
128-line telemetry frames embedded in APT lines
- Radiometric calibration: piecewise-linear LUT built from wedges 1-8
to correct pixel values against known reference levels
- Channel identification: detect AVHRR sensor channels (VIS, NIR, MIR,
TIR) from wedge 9 values per APT sub-channel
- Satellite identification: heuristic NOAA-15/18/19 detection from
channel A/B sensor pairings
- Histogram equalisation: per-channel contrast enhancement for improved
image output
- WxsatImage now carries satellite name and channel labels in decoded
message broadcasts
https://claude.ai/code/session_01JA13DHuzuHUL4nSBBRU83f
Signed-off-by: Claude <noreply@anthropic.com>
New trx-noaa crate: FFT-based Hilbert transform (rustfft) for 2400 Hz
AM demodulation, sync A detection via cross-correlation, line assembly
at 4160 Hz, and JPEG output via the image crate.
- trx-core: NoaaImage type, DecodedMessage::NoaaImage variant,
noaa_decode_enabled/noaa_decode_reset_seq on RigState/RigSnapshot,
AUDIO_MSG_NOAA_IMAGE = 0x16
- trx-server: DecoderHistories::noaa, run_noaa_decoder task (activates
on noaa_decode_enabled, auto-finalises after 30 s silence), saves
JPEGs to ~/.cache/trx-rs/noaa/<YYYY-MM-DD_HH-MM-SS>.jpg, forwards
events over TCP audio channel and history replay
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
New binary crate that generates trx-server.toml, trx-client.toml, or
trx-rs.toml via interactive prompts or --defaults mode. Produces
commented TOML using toml_edit with per-field descriptions.
Supports server config (general, rig, listen, audio, behavior) and
client config (general, remote, frontends). Hardware detection is
stubbed for future iteration.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Normalize tracked SPDX headers to the 2026 Stan Grams identity.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Delete trx-ft8 (C wrapper around ft8_lib + ft2_ldpc) and update
trx-server to depend on trx-ftx (pure Rust) directly. Removes
~2,900 lines of C code and all unsafe FFI.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Replace the C FFI-based trx-ft8 with a pure Rust implementation
supporting FT8, FT4, and FT2 protocols. Eliminates cc/libc build
dependencies and all unsafe FFI code while providing the same
Ft8Decoder/Ft8DecodeResult public API.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Move aprsfi and pskreporter modules from trx-server into a new
standalone trx-reporting library crate. Config types (AprsFiConfig,
PskReporterConfig) move to trx-reporting and are re-exported from
trx-server::config for backwards compatibility.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Add [workspace.package] version = "0.1.0" to the root Cargo.toml and
switch all 21 member crates to version.workspace = true so the entire
workspace is versioned from a single place.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Add VirtualChannelManager trait in trx-core::vchan with types VChannelInfo,
VChanError, and SharedVChanManager alias. Re-export from trx-backend::vchan.
Implement SdrVirtualChannelManager in trx-backend-soapysdr:
- Wraps Arc<SdrPipeline> + shared AtomicI64 center_hz
- add_channel / remove_channel / set_channel_freq / set_channel_mode
- Slot-stability: on remove, shifts pipeline_slot for surviving channels
- update_center_hz: recomputes IF offsets for all virtual channels on retune
- update_primary_meta: keeps channel-0 freq/mode in sync for API consumers
Wire into SoapySdrRig (holds Arc<SdrVirtualChannelManager>, exposes
channel_manager()), SdrPipeline (shared_center_hz AtomicI64), and RigHandle
(vchan_manager: Option<SharedVChanManager>). main.rs extracts the manager
before boxing the SDR rig and stores it in the handle.
Add max_virtual_channels to SdrConfig (default 4, TOML-configurable).
Add 5 unit tests: add, remove, permanent guard, cap, out-of-bandwidth.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Add flate2 dependency and a new AUDIO_MSG_HISTORY_COMPRESSED (0x0a)
wire type. The server gzip-compresses the full history blob before
sending; JSON history compresses ~10-20x so both transfer size and
client wait time drop significantly. The client decompresses and
dispatches sub-messages from the embedded framed stream. MAX_PAYLOAD_SIZE
is kept at 1 MB for normal messages; a separate 16 MB limit is applied
only to the compressed history type.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Add a new trx-vdes decoder path alongside AIS, wire VDES through the server/frontend decode pipeline, and fix the web map so AIS vessel symbols load correctly and the TRX receiver marker appears when location data arrives.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Add dual-channel AIS decode support across the SoapySDR backend, server decode pipeline, and frontend plugins, including the new AIS tab, live bar, and map filtering.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Introduces the trx-backend-soapysdr crate with a compilable SoapySdrRig
struct that satisfies the Rig + RigCat trait bounds. RX methods
(get_status, set_freq, set_mode, get_signal_strength) are implemented;
TX-only methods return RigError::not_supported. as_audio_source returns
None for now (overridden in SDR-07). Wires the crate into the workspace
and trx-backend (feature "soapysdr"), and fixes the non-exhaustive match
on RigAccess::Sdr in trx-server main.rs and rig_task.rs.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Move DecoderLoggers and DecodeLogsConfig out of trx-server into a
dedicated src/decoders/trx-decode-log crate, giving file logging the
same standalone crate treatment as the four decoder crates.
- src/decoders/trx-decode-log/ (new — DecodeLogsConfig + DecoderLoggers)
- trx-server/config.rs: re-exports DecodeLogsConfig from trx-decode-log
so ServerConfig field references and all tests compile unchanged
- trx-server: drop decode_logs module, use trx_decode_log directly
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Move the Goertzel-based CW decoder out of trx-server::decode::cw into
a dedicated src/decoders/trx-cw crate, matching the layout of trx-aprs,
trx-ft8, and trx-wspr. The decode module is now empty and removed.
- src/decoders/trx-cw/ (new — Goertzel + Morse decoder)
- trx-server: drop decode module entirely, use trx_cw::CwDecoder
- CwEvent stays in trx-core (mirrors AprsPacket / Ft8Message / WsprMessage)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Move trx-ft8 and trx-wspr into src/decoders/ alongside a new trx-aprs
crate that extracts the Bell 202/AX.25 decoder from trx-server, giving
all three modems a consistent crate-per-decoder layout.
- src/decoders/trx-ft8/ (moved from src/trx-ft8/)
- src/decoders/trx-wspr/ (moved from src/trx-wspr/)
- src/decoders/trx-aprs/ (new — Bell 202 AFSK + AX.25/APRS decoder)
- trx-ft8/build.rs: fix external/ft8_lib relative path after move
- trx-server: drop decode::aprs module, use trx_aprs::AprsDecoder
- AprsPacket stays in trx-core (mirrors Ft8Message / WsprMessage)
- Workspace Cargo.toml updated with new member paths
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add a new trx-wspr crate that wraps wsprd slot decoding and parsed
results, wire it into the server audio pipeline, and emit WSPR decode
events to clients.
Also add frontend event routing for WSPR decode messages and temporary
rendering in the FT8 table until a dedicated WSPR panel is introduced.
Co-authored-by: Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Replace server's local implementations with unified trx-app utilities.
Changes:
- Use trx_app::normalize_name() instead of local fn
- Depend on trx-app crate
This eliminates the server's copy of the normalize_name logic and ensures
both server and client use the same implementation.
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Update workspace Cargo.toml to include new trx-protocol crate
and update Cargo.lock with new dependencies.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Remove macOS AppKit frontend (trx-frontend-appkit) and related code:
- Delete appkit crate directory
- Remove appkit dependency and feature from Cargo.toml
- Remove appkit imports, main thread handling, and config from main.rs
- Remove AppKit config struct from config.rs
- Remove appkit section from example config
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add a new trx-frontend-appkit crate using objc2 + AppKit as a
replacement for the removed Qt/QML frontend. The frontend provides
the same feature set: frequency/mode/band display, PTT/power/VFO/lock
controls, signal/TX metering, and frequency/mode/TX-limit input.
Architecture splits platform-agnostic model (model.rs) from AppKit
UI (ui.rs) to facilitate future UIKit porting. State flows from the
async tokio watcher via std::sync::mpsc to the AppKit main thread;
button actions flow back through a channel to stay on the UI thread.
Feature-gated behind `appkit-frontend` cargo feature.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Remove the Linux-only Qt/QML frontend (trx-frontend-qt) crate and all
references to it from the workspace, trx-client binary, configuration,
and documentation. This prepares for replacement with a native macOS
AppKit frontend.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Move the frontend and backend crate trees to live physically under their
respective binary crate directories, grouping related code together
without merging crate boundaries. Also flatten sub-crate nesting by
moving them out of src/ subdirectories into direct children.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Delete trx-bin (all-in-one) and trx-bin-common (shared lib). Each binary
now has its own config, plugins, and helper modules inlined.
- trx-server: backend-only daemon with ServerConfig (general, rig, behavior)
no frontend dependencies
- trx-client: remote client with ClientConfig (general, remote, frontends)
includes all frontend support (http, rigctl, http-json, qt)
- Dedicated config files: trx-server.toml / trx-client.toml
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Claude
sjg
