Drop the now-unused rigctl_port local after removing\nthe shared rigctl listener path.\n\nCo-authored-by: Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Remove the shared rigctl listener path so rigctl only\nruns as per-rig listeners configured through\nfrontends.rigctl.rig_ports.\n\nTighten client config validation to require at least one\nper-rig rigctl port when the rigctl frontend is enabled.\n\nCo-authored-by: Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Make the primary SoapySDR DSP channel follow the tuned\nfrequency so RDS decoding stays aligned with the active\nfrequency rather than the hardware center.\n\nMove the default WFM deemphasis setting to server SDR\nconfig and default it to 50 us, then pass that value into\nthe SoapySDR backend.\n\nCo-authored-by: Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Add server-side debug log when RDS data is decoded (PI, PS, PTY).
Extend the RDS panel with active mode, frame counter, and a raw JSON
dump of the last spectrum frame (bins excluded) to help diagnose why
RDS remains absent from the SSE stream.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Draw small peak markers on strong visible spectrum maxima\nso snap-tune targets are easier to spot.\n\nCo-authored-by: Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Apply the same explicit height and padding rules to the\nAuto BW button as the Set button in the spectrum\ncontrols, including the mobile layout.\n\nCo-authored-by: Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Add an RDS sub-tab to the Plugins panel showing PI code, PS name, PTY
number and name, decoder status, and a raw JSON dump of the latest RDS
data received via SSE. Also list the RDS decoder in the Overview tab.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Include the snapped peak signal level in the spectrum\nhover tooltip alongside the peak frequency.\n\nCo-authored-by: Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
The FIR LPF cutoff was audio_bandwidth_hz/2; with wfm_bandwidth_hz=75000
this gave 37.5 kHz, stripping the 57 kHz RDS subcarrier before FM
demodulation. Clamp the IQ filter bandwidth to at least 130 kHz (cutoff
≥ 65 kHz) for WFM so the RDS subcarrier always reaches the decoder,
regardless of the configured audio bandwidth.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Add an Auto BW control that estimates a suitable\nreceive bandwidth from the live spectrum around the\ncurrently tuned peak and applies it to the server.\n\nCo-authored-by: Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Update the local tuned-frequency state immediately after\nsuccessful set_freq requests so the marker and display stay\nin sync with click-to-tune, manual entry, and jog tuning.\n\nCo-authored-by: Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Show snapped peak frequencies in the spectrum hover tooltip\nand move the bandwidth label to the bottom of the tuned\nfrequency marker.\n\nCo-authored-by: Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Improve spectrum click-to-tune by snapping the selected\nfrequency to a nearby dominant local peak, making signals\neasier to select.\n\nCo-authored-by: Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
In multi-rig mode, each RigInstanceConfig.audio.listen defaulted to
127.0.0.1 independently of the global [audio] listen setting, causing
per-rig audio ports to bind to localhost only and refuse connections
from remote clients.
Fix by passing cli.listen.or(Some(cfg.audio.listen)) as the listen
override, so the global address is always the fallback when --listen
is not supplied on the CLI.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Keep the top bar visible for unauthenticated users, but\nhide the rig selector until a session is established.\n\nCo-authored-by: Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Keep the top bar visible while logged out, limit access to\nthe Main tab, and leave theme controls available while the\nrig selector stays disabled.\n\nRename the internal style ids from nord/arctic and\nmonokai/lime, including a compatibility remap for saved\nsettings.\n\nCo-authored-by: Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Rename the Nord and Monokai theme labels in the web UI\nto Arctic and Brownie, and update the matching CSS\nsection comments.\n\nCo-authored-by: Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Only trx-rs.toml with [trx-server] / [trx-client] section headers is
now supported. Simplify ConfigFile trait to a single required method
section_key(); remove config_filename(), combined_key(), and
default_search_paths(). load_from_file() now errors when the expected
section is absent rather than falling back to flat parsing.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Update the README system libraries section to list\nlibsoapysdr as a build-time requirement for SoapySDR\nSDR backends.\n\nCo-authored-by: Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Add rig_ports map to RigctlFrontendConfig. When non-empty, one rigctl
TCP listener is spawned per entry instead of the single shared listener,
each routing commands to its assigned rig via rig_id_override on RigRequest.
Add rig_id_override: Option<String> to RigRequest so the remote client
can route individual requests to a specific rig without changing the
globally selected rig. build_envelope prefers the override when set.
Example config:
[frontends.rigctl]
enabled = true
listen = "127.0.0.1"
port = 4532
rig_ports.ft817 = 4532
rig_ports.airspyhf = 4533
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Document the combined trx-rs.toml search order and clarify\nthe HTTP auth example for combined vs legacy config files.\n\nCo-authored-by: Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Remove the home-directory dotfile paths that predate the XDG layout.
Search order is now: CWD → ~/.config/trx-rs/ → /etc/trx-rs/, checked
for both the combined trx-rs.toml and the per-binary flat file at each
tier.
Update doc comments and tests accordingly.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Remove trx-server.toml.example and trx-client.toml.example in favour of
a single trx-rs.toml.example using [trx-server] and [trx-client] section
headers.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Superseded by example_combined_toml() which now covers all use cases.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Both trx-server and trx-client now look for a combined trx-rs.toml
with [trx-server] and [trx-client] section headers respectively,
falling back to per-binary config files as before.
Search order per tier: combined trx-rs.toml → flat per-binary file,
checked in CWD, ~/.config/trx-rs/, and /etc/trx-rs/.
--print-config now outputs the config under the appropriate section
header so the combined file can be generated directly.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
JS: fix stereo AudioData channel copy — frame.copyTo with planeIndex:0
only fills the left plane; reading it as interleaved data caused every
other sample to be zero, making WFM stereo play at half speed. Now
calls copyTo per channel with the correct planeIndex.
Rust WFM: replace integer output_decim/output_counter in WfmStereoDecoder
with a fractional phase accumulator (output_phase_inc = audio_rate /
composite_rate). Integer division caused the effective output rate to
drift from audio_sample_rate when the SDR rate is not an exact multiple
(e.g. 2 MHz SDR → 250 kHz composite → ~50 kHz output instead of 48 kHz,
making audio play 4% slow).
Rust non-WFM: add resample_phase/resample_phase_inc to ChannelDsp and
use a fractional-phase resampler in process_block for non-WFM paths,
ensuring exactly audio_sample_rate samples/sec regardless of SDR rate.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Fix updateJogStepSupport to snap jogUnit (not jogStep) to nearest
supported unit, then recompute jogStep = jogUnit * jogMult so the
multiplier is preserved across rig connect/reconnect.
Rename "Mult" label to "Unit Multiplier" for clarity.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Fix waterfall overview freezing at steady state by tracking a monotonic
push counter instead of row array length — the array size stays constant
once the waterfall is full, so the previous row-count comparison never
triggered the incremental draw path.
Fix WFM RDS not decoding when switching to WFM from a narrowband mode:
set_mode now resets audio_bandwidth_hz to the mode-appropriate default
(180 kHz for WFM) before rebuilding the FIR, preventing the 57 kHz RDS
subcarrier from being filtered out.
Add 1×/10×/100× multiplier button group next to the jog unit selector.
jogUnit × jogMult gives the effective jog step; both are persisted to
localStorage independently.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Lower SPECTRUM_POLL_INTERVAL and SSE tick from 100 ms to 200 ms to halve
the number of spectrum frames pushed to the browser.
Introduce an OffscreenCanvas cache for the overview waterfall: at steady
state only the new row is painted and the existing image is scrolled up,
reducing per-frame work from O(rows × cols) to O(cols).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
When a WFM/SDR spectrum stream carries RDS data, show the Program
Service name (8-char station name) centered on the visible waveform
area in DSEG14 monospace — the same font as the frequency display.
- Add #rds-ps-overlay div inside .overview-strip (pointer-events: none,
z-index: 2, absolutely positioned at the center of the visible canvas)
- updateRdsPsOverlay(rds) shows/hides and updates text on every spectrum
frame; trims trailing spaces common in RDS PS strings
- Overlay cleared on spectrum disconnect / null frame
- text-shadow uses CSS color-mix against --bg for legibility across all
style/theme combinations
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
When in dark mode the button has a light appearance; when in light mode
it has a dark appearance. This makes the button a preview of what
clicking will switch to, rather than mirroring the current theme.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Same root cause as the overviewDrawPending TDZ: setStyle() references
lastSpectrumData at module init time but it was declared far below.
Hoist let lastSpectrumData = null to the top variable block and remove
the now-duplicate declaration.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
setStyle() was called at module init time (to restore the saved style
from localStorage) before the let overviewDrawPending declaration, which
caused a ReferenceError: Cannot access 'overviewDrawPending' before
initialization.
Fix: hoist let overviewDrawPending = false to the top of the variable
declarations block, before any top-level code that may call
scheduleOverviewDraw(). Remove the now-duplicate declaration from its
original location.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Add a style picker dropdown to the tab bar (right of rig picker) with
four styles — Original, Nord, Monokai, Contrast — each with full
light/dark variants.
CSS: define data-style attribute overrides for all CSS custom properties
(bg, card-bg, borders, text, accents, jog, audio level, filter, spectrum
background) for each of the three new styles × two themes (6 new blocks).
JS: introduce CANVAS_PALETTE lookup table covering spectrum/waveform/
waterfall colors for all style×theme combinations. Add currentStyle(),
canvasPalette(), setStyle() helpers. Persist selection to localStorage.
Replace all isLight ternaries in drawing code with palette lookups:
- drawOverviewWaterfall, drawOverviewSignalHistory, waterfallColor
signatures changed from isLight flag to pal object
- drawSpectrum uses canvasPalette() for grid lines, labels, fill, line
- spectrumBgColor() now delegates to canvasPalette().bg
Theme toggle also triggers a spectrum redraw so canvas colors update
immediately when switching light/dark.
Also fix light-theme spectrum rendering broken since canvas drawing used
hardcoded dark-only colors (white grid lines invisible on light bg).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
sjg
