Replace per-message write + flush-every-64 with a single in-memory blob
that is sent via one write_all + one flush. Add estimated_total_count()
to DecoderHistories for pre-allocation. Eliminates N/64 partial flushes
and repeated small writes that dominated replay latency for large APRS
histories.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
ResetCwDecoder already bumped cw_decode_reset_seq but omitted the
history flush that APRS, FT8, and WSPR all perform. Wire
clear_cw_history() into the handler to match the pattern.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
No reset event for CW is wired in rig_task.rs, so the method was
dead code and triggered a compiler warning.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Subscribe to the first sdr.channels[] entry configured as VDES or
MARINE instead of always using channel 0. The ChannelDsp IQ tap only
emits samples when its own mode is VDES/MARINE, so the two must agree.
Fix vdes_sr to mirror channel.rs pipeline_rates(): use
audio_sample_rate.max(96_000) as the target rather than the hardcoded
96_000. The two diverge when audio_sample_rate > 96_000, causing the
VdesDecoder to use the wrong symbol-to-sample ratio.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Move persistent history from trx-client to trx-server where decode
events originate. History for AIS, VDES, APRS, CW, FT8, and WSPR is
loaded from ~/.local/cache/trx-rs/history.db at startup and flushed
to disk every 60 seconds. CW events are now also stored in
DecoderHistories and replayed to connecting clients, consistent with
all other decoder types.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Two problems prevented reliable recovery after a persistent overflow:
1. Restart storm: once read_error_streak >= 3, every subsequent read
failure triggered a deactivate/activate cycle, potentially preventing
the hardware from stabilising. Fix: after a successful restart, reset
read_error_streak to 1 so the stream gets 2 more failures before the
next restart attempt.
2. Stuck-deactivated stream: if activate() failed after overflow, the
stream was left deactivated. Subsequent reads returned non-overflow
errors which handle_read_error ignored (Ok(false)), so the stream was
never reactivated. Fix: add a high-streak fallback (>= 10 consecutive
errors of any kind) that also attempts a full deactivate/activate
restart, covering the stuck-deactivated case.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Two bugs triggered by a SoapySDR IQ overflow:
1. Spectrum dies permanently (trx-client): when GetSpectrum times out
(300ms SPECTRUM_IO_TIMEOUT), the error was silently swallowed and
the spectrum buffer cleared. The in-flight response remained in the
TCP receive buffer, desynchronising all subsequent reads so every
poll kept failing. Fix: propagate the error so handle_connection
returns and the outer loop reconnects, restoring TCP sync.
2. CTRL+C hangs trx-server: after IQ overflow, the sdr-iq-read thread
can get stuck in a blocking SoapySDR/USB call (deactivate/activate
with no timeout). Tokio received SIGINT and aborted async tasks, but
the process could not exit while the native thread was blocked in
uninterruptible I/O. Fix: call std::process::exit(0) after the
graceful shutdown sequence so the OS forcibly terminates all threads.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Add per-channel processing gating and disable hidden AIS channel DSP unless mode is AIS or MARINE, reducing continuous IQ read-loop CPU load in normal operation.\n\nCo-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Skip IQ fanout buffer cloning when no subscribers exist and apply backoff on repeated zero-length reads to avoid hot-loop CPU spikes.\n\nCo-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Enforce CW decode processing only when mode is CW/CWR and decoder
is enabled, even within the receive loop, and remove CW path RMS
zero-gating to preserve weak tone decoding.
Co-authored-by: Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Expand server-side CW tone command clamping to 100-10000 Hz to match
frontend controls and picker behavior.
Co-authored-by: Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Apply an RMS gate to near-silent decoder input frames and zero them
before APRS/CW/FT8/WSPR processing to avoid false decodes from
unsquelched/no-signal noise.
Co-authored-by: Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Gate the CW decoder task on cw_decode_enabled in both startup and state changes.
This restores the UI toggle and prevents decode activity when CW decode is off.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Make FT-817 mode setting fail for unsupported modes instead of silently mapping SDR-only modes onto FM.
Co-authored-by: Stan Grams <sjg@haxx.space>
Signed-off-by: Stan Grams <sjg@haxx.space>
Remove SDR-only decoder modes from the FT-817 supported mode list so they are not shown in that rig's mode picker.
Co-authored-by: Stan Grams <sjg@haxx.space>
Signed-off-by: Stan Grams <sjg@haxx.space>
Raise the AM audio AGC target and headroom again so the restored envelope demod path plays at a stronger level.
Co-authored-by: Stan Grams <sjg@haxx.space>
Signed-off-by: Stan Grams <sjg@haxx.space>
Retune the AM audio AGC target, timing, and headroom so the restored envelope demod path plays back at a stronger level.
Co-authored-by: Stan Grams <sjg@haxx.space>
Signed-off-by: Stan Grams <sjg@haxx.space>
Revert the recent AM coherent detector experiment and restore the original envelope detector path.
Co-authored-by: Stan Grams <sjg@haxx.space>
Signed-off-by: Stan Grams <sjg@haxx.space>
Remove half-wave clipping from the AM coherent detector output and slow the carrier-reference tracking to reduce audible distortion.
Co-authored-by: Stan Grams <sjg@haxx.space>
Signed-off-by: Stan Grams <sjg@haxx.space>
Replace the raw AM envelope detector with a limiter-derived coherent detector and update backend tests for the current channel DSP constructor.
Co-authored-by: Stan Grams <sjg@haxx.space>
Signed-off-by: Stan Grams <sjg@haxx.space>
Finish the pending MARINE frontend and decoder activation wiring, and lower the VDES detector power floors so weak signals are eligible for burst detection in the same power domain used by the IQ path.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Keep the SoapySDR VDES and MARINE IQ path at a much higher channel sample rate instead of collapsing toward the normal audio rate, so the decoder receives usable complex baseband for the 76.8 ksps VDES signal.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add an FT8 live overlay bar, align APRS top controls with the other decoder tabs, advertise MARINE in the SoapySDR mode list, and make the VDES decoder emit raw unsynced diagnostic frames instead of dropping weak bursts outright.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Keep weak VDES bursts visible by emitting unsynced diagnostic frames instead of dropping them, remove receiver badges from FT8 and WSPR history rows, and carry the current MARINE composite-mode scaffolding through the shared mode enums and backend mappings.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Improve the VDES decoder with sync/rotation metadata and a first hard-decision rate-1/2 Viterbi stage after deinterleaving, then surface the extra lock state in the VDES frontend. Also fix the strict clippy findings in AIS, frontend bookmarks, and the server audio stack signature.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add a dedicated VDES plugin tab and live bar, stop reusing the AIS vessel UI, and serve a separate VDES frontend script. Rework the SDR backend so VDES receives a single 100 kHz IQ tap, then replace the fake AIS-clone decoder path with an early M.2092-1 oriented complex-baseband scaffold using burst detection, coarse pi/4-QPSK slicing, and TER-MCS-1.100 frame heuristics.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add a new trx-vdes decoder path alongside AIS, wire VDES through the server/frontend decode pipeline, and fix the web map so AIS vessel symbols load correctly and the TRX receiver marker appears when location data arrives.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
Add dual-channel AIS decode support across the SoapySDR backend, server decode pipeline, and frontend plugins, including the new AIS tab, live bar, and map filtering.
Co-authored-by: OpenAI Codex <codex@openai.com>
Signed-off-by: Stan Grams <sjg@haxx.space>
sjg
