When a scheduler-managed decoder is manually disabled from the frontend,
take scheduler control first so the manual change overrides the current
scheduler cycle like a direct frequency change does.
Track decoder enabled state on the toggle buttons and only take over
when the click is actually disabling FT8, FT4, FT2, WSPR, or HF APRS.
Co-Authored-By: OpenAI Codex <noreply@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Invalidate main-decoder windows whenever the rig's main frequency
changes, including direct SetFreq, scheduler-driven retunes, and
external CAT retunes observed during polling.
The decoder loops now resubscribe their PCM receivers on reset and drop
results that finish after the reset sequence advances, preventing false
decodes from stale pre-retune audio.
Co-Authored-By: OpenAI Codex <noreply@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
The WSPR 7-bit power field contains the raw dBm value (0-60) with no
offset. The decoder was subtracting 64, turning valid power values into
negative numbers that always failed the range check, causing
unpack_message to return None for every real signal. Also fix callsign
trimming to strip leading spaces from space-padded callsigns.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Allow the main frontend card to grow past the previous 1280px cap
on large screens while keeping side gutters for bookmark stacks.
Only widen the desktop layout at 1440px+ and cap it at 1600px so the
main content stays readable with room for side bookmarks.
Co-Authored-By: OpenAI Codex <noreply@openai.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
The deinterleave function had its indices swapped: it wrote
out[j] = symbols[p] instead of out[p] = symbols[j]. This fed
completely scrambled data to the Fano decoder, making convergence
impossible. Matched against the reference implementation in
raptor/lib/wsprd/wsprd_utils.c which does tmp[p] = sym[j].
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
The OSD-lite decoder was the source of FT2 false positives. It tries
685 CRC-14 checks across 5 passes (1 + 16 + 120 per pass), giving a
~4% chance of accepting random noise as a valid decode.
The reference implementation (decode174_91) verifies OSD results
against the received signal; the trx-rs OSD-lite only checked CRC.
Add ft2_count_hard_errors_vs_llr() which counts how many of the 174
coded bits in an OSD candidate disagree with the received hard
decisions. A legitimate correction disagrees in very few positions;
a false CRC match on noise disagrees in ~40-50 parity positions.
Reject OSD results with more than 36 hard errors.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
The ft8_wrapper.c references ft4_encode and ft8_encode from encode.c,
but encode.c was not included in build.rs, causing linker errors.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
The WSPR decoder was producing almost no valid decodes despite audible
signals. Three root causes:
- No sync vector: the 162-bit WSPR sync pattern was not used, so signal
detection relied on raw peak power which is unreliable.
- Coarse frequency search: 4 Hz steps with 1.465 Hz tone spacing could
miss signals entirely. Now uses 2 Hz coarse + 0.25 Hz fine refinement.
- Fixed timing: assumed signal starts exactly 1s into the slot. Now
searches +/-2s in 0.5s steps to handle real-world timing jitter.
Also evaluates up to 8 frequency/timing candidates per slot and reports
the actual measured timing offset in dt_s.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
The previous SNR formula (cand->score * 0.5 - 29.0) used the adjacent
tone bin as a noise reference. On a crowded FT8 band that bin is often
occupied by another station, inflating the apparent noise floor by
10-15 dB and capping reported SNR at around -10 dB even for strong
signals.
Replace with ftx_post_decode_snr(): re-encode the decoded message to
obtain the exact per-symbol tone sequence, compare each signal bin
against the minimum of the remaining (noise-only) bins, average over
all valid symbols, and apply the WSJT-X 2500 Hz bandwidth correction
dynamically per protocol. This produces accurate SNR estimates for both
FT8 and FT4 regardless of band occupancy.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Primary bookmark was cramped at one grid column; Extra channels was
unnecessarily spanning the full row. Swap their grid-column spans so
the bookmark select gets full width and Extra channels sits in a
normal column alongside Label and Interleave.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Row gap 0.5→0.75rem and label-to-input gap 0.2→0.35rem, scoped
to #sch-entry-form so the bookmark form is unaffected.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Replace the inline always-visible add-row with a modal overlay
(same fixed + blurred-backdrop pattern as the bookmark add/edit
form). The "+ Add Entry" button opens the modal; each row now has
Edit and Remove buttons. Edit pre-fills the modal and updates the
entry in-place on save. CSS reuses the existing bookmark modal
selectors rather than duplicating rules.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add NEON (aarch64) vectorized paths mirroring the existing AVX2 paths:
- demod/math_arm.rs: replace the no-op placeholder with a full NEON FM
discriminator that processes 4 samples per iteration using a 7th-order
minimax atan polynomial and branchless atan2 with argument reduction,
matching the accuracy of the AVX2 path (max error ~2.4e-7 rad).
32-bit ARM retains the scalar fallback.
- dsp/filter.rs: add mul_freq_domain_neon() that deinterleaves 4 complex
pairs via vuzpq/vzipq, performs complex multiply with vmulq/vaddq/vsubq,
then reinterleaves. On aarch64 this path is always taken (NEON is
mandatory); scalar fallback remains for other targets.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add a new "Strongest decoded signal" section below the existing
"Longest decode paths" section on the map tab, showing the top 5
stations with the highest SNR across the current map history window.
Reuses existing map-qso-card styling with SNR displayed in place of
distance.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Replace the always-None stub with a full decode pipeline:
- Bit-reversal deinterleave of 4-FSK symbols (data_bit = symbol >> 1)
- Fano sequential decoder for K=32, rate-1/2 convolutional code
(polynomials 0xF2D05351 / 0xE4613C47, 100k-cycle budget)
- Payload unpack: 28-bit callsign (mixed-radix N1), 15-bit Maidenhead
grid (M1 formula), 7-bit power code (dBm + 64)
- Validity checks on callsign, grid, and power range
- Round-trip unit test for K1JT FN20 37
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
clamp_bandwidth_for_mode now floors AMC bandwidth at 9 kHz so that both
the sum (L+R) and difference (L−R) sidebands are always captured,
regardless of what the user or a set_filter call requests.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
RigMode::AMC was implemented but omitted from the supported_modes vec,
so the HTTP frontend never received it in capabilities and the mode
selector did not show AMC-QUAM.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
- remote_client tests: add missing server_connected field and import
AtomicBool in the test module
- pskreporter: replace map_or(true, …) with is_none_or and
repeat(x).take(n) with repeat_n(x, n)
- dsp.rs, scheduler.rs: suppress intentional too_many_arguments with
#[allow(clippy::too_many_arguments)]
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add a RigMode::AMC arm to encode_mode returning an Err so that
attempting to set C-QUAM on the FT-450D returns a descriptive error.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add RigMode::AMC to the None return arm of encode_mode so that
attempting to set C-QUAM on the FT-817 returns a descriptive error
rather than a compile-time non-exhaustive match.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add "AMC-QUAM" to the MODE_BW_DEFAULTS table in app.js with the same
bandwidth settings as AM (9 kHz default, 500 Hz min, 20 kHz max, 500 Hz
step). Add an <option value="AMC-QUAM"> to the bookmark datalist in
index.html.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add RigMode::AMC arm to default_audio_bandwidth_for_mode, returning
9_000 Hz (same as AM).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add CquamDemod (demod/amcquam.rs) with first-order IIR carrier phase
tracker (τ = 50 ms) that rotates baseband IQ to align I with the sum
audio and Q with the difference audio, then DC-blocks each channel to
yield L/R stereo PCM.
Wire AmCQuam into the Demodulator enum, add ChannelDsp::cquam_decoder
field initialized for RigMode::AMC, and insert the C-QUAM audio path
between the WFM and fallback branches in process_block. Update all
mode-dispatch tables (agc_for_mode, iq_agc_for_mode, dc_for_mode,
default_bandwidth_for_mode, lib.rs, vchan_impl.rs) with AMC arms.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add parse_mode and mode_to_string support for RigMode::AMC, accepting
"AMC-QUAM", "AMC_QUAM", and "AMC" as input strings and serializing to
"AMC-QUAM". Add test cases for round-trip correctness.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
setRigFrequency applied applyLocalTunedFrequency before the network
round-trip, leaving the spectrum view shifted to the new frequency even
when the POST was rejected (e.g. 403 when the user loses control access).
Save the previous frequency and restore it in the catch block so the UI
stays aligned with the actual server-side state.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Show a full-screen blurred overlay (reusing decode-history-overlay styles)
when the SSE connection to trx-client drops or when trx-server is reported
unreachable via server_connected=false. The overlay distinguishes the two
failure modes with separate titles and sub-text. It is dismissed on
es.onopen (trx-client back) or when a message with server_connected!=false
arrives (trx-server back), and cleared on explicit disconnect/logout.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
decodeSource.onerror terminated the history worker but never called
flushLiveBuffer(), leaving historySettled=false and the "Loading decode
history…" overlay stuck on screen when trx-client breaks. Call
flushLiveBuffer() in the error path so the overlay is dismissed and the
powerHint connection-lost message is visible to the user.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
querySelectorAll("span") was picking up the inner .spectrum-bookmark-name
spans added in the previous commit, causing chips[i] to map to the wrong
element during left-position assignment. Switch to :scope > span to
select only direct-child chip spans.
Also revert axis bar from height:auto (which breaks the CSS transition and
collapses the bar) to height:38px with overflow:visible to accommodate
two-line labels while keeping the open/close animation intact.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Suppress stroke-dashoffset animation and drop-shadow filter on all
contact/radio paths when decodeContactPaths.size > 20 by toggling
.map-paths-static on #aprs-map, avoiding per-frame GPU compositing
with large decode histories.
Wrap non-sideStack bookmark chip labels in
<span class="spectrum-bookmark-name"> and allow word-break on axis
chips so long names split across two lines instead of being clipped.
Axis bar switches to min-height so it grows to fit taller chips.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
When the SSE stream drops (onerror or 15s heartbeat timeout) show
"trx-client connection lost, retrying…". When the stream is live but
server_connected is false, show "trx-server connection lost".
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add server_connected bool to FrontendMeta and inject it into every
/status and /events payload so the browser can distinguish between
trx-client and trx-server connection loss.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Store server_connected in RemoteClientConfig and set it true when
handle_connection begins, false when it returns. Wire the Arc clone
from FrontendRuntimeContext into the config at startup.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Track whether the remote client currently has an active TCP connection
to trx-server via a shared AtomicBool. Frontends can read this to
surface a distinct "trx-server connection lost" message.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Side-panel chips used white-space: normal + word-break: break-word,
causing names longer than ~16 characters to wrap onto a second line.
Switch to nowrap + overflow: hidden + text-overflow: ellipsis so long
names are clipped cleanly in a single line.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Drop FirTapsQuery, the set_fir_taps handler, and its service
registration. Tap count is no longer user-configurable.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Drop fir_taps field from SdrChannelConfig and its default. Remove the
SetFirTaps dispatch arm from rig_task. The DSP layer now auto-calculates
tap count from audio_bandwidth_hz.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Replace the static fir_taps parameter with auto_taps(cutoff_norm) which
computes ceil(3.32 / cutoff_norm).clamp(63, 16383). This ensures the
filter transition band equals one passband width regardless of SDR sample
rate, giving correct image rejection when the user sets audio_bandwidth_hz.
At 912 ksps with 3 kHz audio bandwidth this yields ~2018 taps instead
of the previous hardcoded 64, eliminating the 114 kHz stopband gap that
caused adjacent-band signals to alias into the audio output.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Drop SetFirTaps ClientCommand variant and its mapping to/from
RigCommand. Remove fir_taps from RigFilterState codec tests.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Drop the SetFirTaps RigCommand variant, remove the set_fir_taps default
trait method from Rig, and remove the fir_taps field from RigFilterState.
Tap count is now derived automatically from audio bandwidth in the DSP
layer rather than being a user-facing control.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add read_named_gain to IqSource (default: None) and implement it in
RealIqSource via Device::gain_element. Read the "LNA" element before
boxing the source so the initial sdr_lna_gain_db reflects the actual
hardware state, making the UI control visible and correct on first
connect. Devices without an LNA element (e.g. RTL-SDR with "TUNER")
return None and the control stays hidden.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add POST /set_sdr_lna_gain endpoint. Add an LNA Gain input+Set button
to the SDR settings row, styled identically to RF Gain. The control is
hidden until the server reports a sdr_lna_gain_db value (i.e. devices
that expose an LNA gain element). AGC disables it alongside RF Gain.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Handle RigCommand::SetSdrLnaGain by calling set_sdr_lna_gain on the
rig and refreshing filter state, matching the pattern used by
SetSdrGain and SetSdrAgc.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add set_named_gain to the IqSource trait and implement it in
RealIqSource via soapysdr Device::set_gain_element. Wire a
lna_gain_cmd channel through SdrPipeline so the IQ read loop applies
LNA gain changes on the next iteration. Add set_sdr_lna_gain to
SoapySdrRig and expose the current value via filter_state.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Map ClientCommand::SetSdrLnaGain { gain_db } to and from
RigCommand::SetSdrLnaGain in both directions.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
sjg