Add POST endpoints for toggle_aprs_decode, toggle_cw_decode,
clear_aprs_decode, and clear_cw_decode. Add toggle buttons in APRS
and CW tabs. Render decoder enabled state from SSE updates. Clear
button now also resets server-side decoder state.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add SetAprsDecodeEnabled, SetCwDecodeEnabled, ResetAprsDecoder, and
ResetCwDecoder to the JSON TCP frontend command mapping.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Initialize decoder state fields and map new RigCommand/ClientCommand
variants through the remote client TCP bridge.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Process decoder commands as early returns in rig_task (no CAT needed).
Check aprs_decode_enabled/cw_decode_enabled flags in decoder tasks
alongside mode. Track reset_seq to trigger decoder.reset() on clear.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add aprs_decode_enabled, cw_decode_enabled, aprs_decode_reset_seq, and
cw_decode_reset_seq fields to RigState and RigSnapshot. Add corresponding
RigCommand and ClientCommand variants for toggling and resetting decoders.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Replace HEAD probe with EventSource readyState check to properly
detect 404 vs connection drop. HEAD requests to SSE endpoints may
not behave reliably across all setups.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Log whether audio/decode is enabled at startup and warn when
/decode is requested but the decode channel was not set. Helps
diagnose broken decode pipelines.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
The APRS info field is raw AX.25 bytes, not valid UTF-8.
from_utf8_lossy inserts multi-byte replacement characters, causing
panics when the position parser sliced by byte index. Switch
parse_aprs_position, parse_aprs_compressed, parse_aprs_lat, and
parse_aprs_lon to operate on &[u8] instead of &str.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
The decode EventSource silently retried on 404 leaving the status
stuck on "Waiting for server decode". Probe /decode first to
distinguish 404 (audio disabled) from real SSE errors and update
the APRS/CW status text accordingly.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
The capture thread only checked Opus broadcast subscribers to decide
whether to start cpal input. PCM tap subscribers (APRS/CW decoders)
were not considered, so decoding never started without a browser
audio client. Include pcm_tx receiver count in the has_receivers
check.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Server-side decoding makes client-side decoders redundant. Remove
~1000 lines of browser-side Bell 202 AFSK, AX.25/APRS parsing, and
Goertzel CW decoding. The frontend now relies solely on the /decode
SSE endpoint for decoded data.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Clears the packet list, map markers are unaffected. Also wipes
the persisted packet history from localStorage.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add /decode SSE endpoint streaming decoded messages from the server.
Add decode channel OnceLock with set/subscribe pattern.
In the browser, connect to /decode EventSource and dispatch to
onServerAprs/onServerCw handlers. APRS and CW plugins now receive
server-decoded data automatically while keeping browser-side decoding
as a fallback.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Handle APRS/CW decode message types (0x03/0x04) in audio_client,
deserialize and forward via broadcast channel. Create decode channel
and pass to audio client and HTTP frontend.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Port Bell 202 AFSK demodulator (correlation detector, PLL clock
recovery, NRZI+HDLC, AX.25/APRS parser) and Goertzel CW decoder
(auto tone scan, auto WPM via k-means, Morse lookup) from browser JS
to Rust.
Add PCM tap to audio capture thread, spawn APRS/CW decoder tasks
gated by rig mode (PKT for APRS, CW/CWR for CW). Forward decoded
messages over the audio TCP wire using new message types 0x03/0x04.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Add localStorage persistence (trx_ prefix) for UI settings:
- Jog step, RX/TX volume (app.js)
- CW WPM, tone, threshold, auto-detect flags (cw.js)
- APRS decoded packets and running state (aprs.js)
APRS decoder auto-restarts on page refresh if it was active,
and all decoded packets plus map markers are restored from storage.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
Render non-ASCII characters in decoded APRS info text as yellow
[0xNN] hex tags. Printable ASCII is HTML-escaped to prevent XSS.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Stanislaw Grams <stanislawgrams@gmail.com>
sjg