trx-rs
Rig: --
Access Required
Enter passphrase to continue
Initializing (rig)…
Bandwidth kHz
Peak Hold
Floor dB
Scroll to zoom · Ctrl+Scroll to tune · Drag to pan · Drag BW edges to resize
Pinch to zoom · Drag to pan · Drag BW edges to resize
--
Wavelength
Frequency
Center Frequency
Unit
Tune Step
Mode
Deemphasis
Audio
RF Gain
MO
WFM
Transmit / Power
VFO
Signal
--
TX Meters
PWR --
SWR --
TX Limit — units depend on rig (percentage/watts)
Audio
RX80% TX80%
Off
APRS Decoder
Decodes APRS packets from RX audio using Bell 202 AFSK (1200 baud).
CW Decoder
Decodes CW (Morse code) from RX audio.
FT8 Decoder
Decodes FT8 messages from RX audio (DIG/USB only, toggle required).
WSPR Decoder
Decodes WSPR messages from RX audio (DIG/USB only, toggle required).
RDS Decoder
Decodes Radio Data System (RDS) metadata from WFM broadcasts (57 kHz subcarrier).
Status No signal
Active mode--
Frames received 0
PI--
PS--
PTY--
PTY Code--
PTYN--
TP--
TA--
Audio--
Stereo--
Compressed--
Artificial Head--
Dynamic PTY--
AF--
RadioText--
Raw JSON (last spectrum frame)

    --

Waiting for server decode
Waiting for server decode Next slot --s
Time SNR DT RF Message
Waiting for server decode Next slot --:--
Time SNR DT RF Message
Waiting for server decode
Auto WPM Tone (Hz)
APRS FT8 WSPR
Authenticated as: --

Server version | --
Server address | --
Server callsign | --
Rig | --
Active rig | --
Available rigs | --
Rig connection | --
Supported modes | --
VFOs | --
Rigctl endpoint | --
Rigctl clients | --
PSK Reporter | --
Client version | {pkg} v{ver}
Connected clients | --