trx-rs v{ver}

trx-rs

Rig: --

Access Required

Enter passphrase to continue

Initializing (rig)…

Bandwidth kHz

Peak Hold Floor dB

Scroll to zoom · Ctrl+Scroll to tune · Drag to pan · Drag BW edges to resize

Pinch to zoom · Drag to pan · Drag BW edges to resize

50/50

Wavelength

Frequency

Center Frequency

Unit

Step Scale

Mode

Deemp Audio Denoise Level Pilot MO

WFM

Transmit / Power

VFO

SDR settings

Hardware AGC

RF Gain

LNA Gain

Channels / Scheduler

Scheduler is controlling the rig.

Interleaving: --

Signal

TX Meters

PWR --

SWR --

TX Limit — units depend on rig (percentage/watts)

Audio

RX80% TX80% SQLOpen

Off

Add Bookmark

Name Category Frequency (Hz) Mode Bandwidth (Hz) Locator

Decoders

APRS AIS FT8 FT4 FT2 WSPR HF APRS

Comment

Name	Frequency	Mode	BW	Locator	Category	Decoders	Comment	Actions

No bookmarks yet. Click + Add Bookmark to save a frequency.

Showing 0-0 of 0

Page 1 of 1

AIS Decoder

Decodes dual-channel AIS traffic from RX audio using 9.6 kbit/s GMSK and HDLC.

VDES Decoder

Decodes single-channel 100 kHz VDES bursts from SDR IQ using the dedicated VDES path.

APRS Decoder

Decodes APRS packets from RX audio using Bell 202 AFSK (1200 baud).

CW Decoder

Decodes CW (Morse code) from RX audio.

FT8 Decoder

Decodes FT8 messages from RX audio (DIG/USB only, toggle required).

FT4 Decoder

Decodes FT4 messages from RX audio (DIG/USB only, toggle required). 7.5-second slots.

FT2 Decoder

Decodes FT2 messages from RX audio (DIG/USB only, toggle required). 3.75-second slots.

WSPR Decoder

Decodes WSPR messages from RX audio (DIG/USB only, toggle required).

RDS Decoder

Decodes Radio Data System (RDS) metadata from WFM broadcasts (57 kHz subcarrier).

StatusNo signal

Active mode--

PI--

PS--

PTY--

PTY Code--

PTYN--

TP--

TA--

Audio--

Stereo--

Compressed--

Artificial Head--

Dynamic PTY--

AF--

RadioText--

Raw JSON (last spectrum frame)

--

Waiting for server decode

Channels A 161.975 MHz · B 162.025 MHz

Tracked 0 vessels

Latest No traffic yet

Waiting for server decode

Channel 100 kHz centered on tuned frequency

Frames 0 bursts

Latest No traffic yet

Waiting for server decode

Frames 0 total

Visible 0 shown

Latest No packets yet

Waiting for server decode

Frames 0 total

Visible 0 shown

Latest No packets yet

Waiting for server decode Next slot --s

Time SNR DT RF Message

Showing up to 200 most recent decodes. Full history is available on the Map tab.

Waiting for server decode Next slot --s

Time SNR DT RF Message

Showing up to 200 most recent decodes. Full history is available on the Map tab.

Waiting for server decode Next slot --s

Time SNR DT RF Message

Showing up to 200 most recent decodes. Full history is available on the Map tab.

Waiting for server decode Next slot --:--

Time SNR DT RF Message

Waiting for server decode

Auto WPM + Tone WPM Tone (Hz)

CW Audio Tone Picker --

Filter by

Show

History

Paths

TRX paths on popup, directed decode paths when target locator is known

Longest decode paths

Top 5 directed decode paths in the current map view

Strongest decoded signal

Top 5 strongest signals in the current map history

Mode

Grayline Settings

Latitude (°) Longitude (°) Transition window (min)

Dawn bookmark Day bookmark Dusk bookmark Night bookmark

Time Span Entries (UTC)

Interleave time (min) When multiple entries overlap, spend this many minutes at each before cycling. Leave blank to disable.

Start	End	Center freq	Primary bookmark	Extra channels	Label	Interleave (min)

Add Entry

Start (UTC) End (UTC) Center freq (Hz, SDR) Primary bookmark Extra channels (virtual)

Label (optional) Interleave (min, optional)

Last Activity

No activity yet.

Configuration

Background decode Enable hidden background decoder channels

Bookmark

Runtime Status

No background decode bookmarks configured.

Full Decode History

These buttons clear the server-side decode history and reset the corresponding decoder state.

Authenticated as: --

Server version	--
Server address	--
Server callsign	--
Rig	--
Active rig	--
Available rigs	--
Rig connection	--
Supported modes	--
VFOs	--
Rigctl endpoint	--
Rigctl clients	--
PSK Reporter	--
APRS-IS	--
Client version	{pkg} v{ver}
Connected clients	--

Built by SP2SJG from haxx.space · trx-rs on GitHub — - trx-server v-- -- - trx-client v{ver} {client_build_date}

Connecting…